Cycle Control Systems in Paramount, CA, USA

Cycle Control Systems
Photoelectric Cycle Control
The
Photoelectric Cycle Control
consists of a light source and a reflector. The kit can be mounted on the chute attached to the packer or on opposite walls of the room in which the packer is installed. In the latter arrangement, two holes, properly located so as to eliminate any hazard, should be provided in the chute for the light beam. This mounting arrangement keeps the photoelectric eye and reflector cleaner and reduces the chance of accidental mis-alignment while in use. The light source is LED and, therefore, the beam is not visible. It will, however, penetrate dust and carry over a longer distance than the conventional light bulb. When the light beam has been interrupted for approximately 15 seconds, it will automatically activate the packer which will continue running until the obstruction between the light source and reflector is cleared.