RJ-88HT Self-Contained Compactor / Containers in Paramount, CA, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Cu yds
- A*; B; C; D; E; Weight
- 16 cu yds
- 44″ 1118mm; 30 1/2″ 777mm; 70″ 1778mm; 216″ 5486mm; 94″ 2388mm; 7700 lbs. 3493 kg.
- 20 cu yds
- 44″ 1118mm; 30 1/2″ 777mm; 70″ 1778mm; 250″ 6350mm; 94″ 2388mm; 8100 lbs. 3674 kg.
- [mfrs. rating]
- 1.0 cy; .76 m3
- [wastec rating]
- 0.70 cy; .54 m3
- Clear top opening
- 30.5″ L X 48″ W; 775mm x 1219mm
- Cycle time
- 44 sec; 44 sec
- Total normal force
- 36,600 lb; 162 kN
- Total maximum force
- 43,100 lb; 192 kN
- Normal ram face pressure
- 34.7 psi; 239 kPa
- Maximum ram face pressure
- 40.8 psi; 281 kPa
- Ram penetration
- 6Ó; 152 mm
- Electric motor 3/60/230-460
- 5 hp; 3.7 kW
- Electric control voltage
- 120 VAC; 120 VAC
- Hydraulic pump
- 6 gpm; 23 L/min
- Normal pressure
- 1700 psi; 117 bar
- Maximum pressure
- 2000 psi; 138 bar
- Cylinder bore
- 2 @ 4″ each; 102 mm
- Cylinder rod
- 2 @ 2.5″; 64 mm
- Category
- Waste Compactors in USA
- Subcategory
- Self contained compactors
- Subcategory 2
- Rj-88ht self-contained compactor/ containers
- Listing ID
- 95039445
Description
RJ-88HT Self-Contained Compactor / Containers
Mark-Costello’s
RJ-88HT Self-Contained Compactor/ Containers
are ideal for waste with high liquid content and for applications where maneuvering space for the collection vehicle is limited. Unique to the
RJ-88HT,
the compactor is built into the same door through which the compacted refuse is later emptied, eliminating the need for the additional space necessary for the time-consuming double “turn-around” maneuver required for conventional self-contained models.
Each RJ-88 series compactors store liquid and controls insect and odor problems.
The RJ-88HT is ideal for…
Shopping Centers
Supermarkets
Restaurants
Hotels
In flight Kitchens
Hospitals and institutions
Components are selected for longevity and minimum maintenance, with special attention given to the selection of highly sensitive components. Stress engineering provides the optimum degree of structural integrity. Only the best materials are used.