FERPLAST Inkjet marker FPA2-DSL PROMO in Guarene, Piedmont, Italy
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Resolution
- 600x300 dpi based on resolution and printing speed
- Print engine
- Hewlett-Packard Thermal Ink Jet Technology
- Print speed
- 72 m/min at 300 dpi, horizontal resolution
- Maximum printing height
- 12,7 mm (1 row)
- Minimum printing height
- 2,7 mm (on several lines)
- Print distance
- 6 mm recommended
- 5 indicator leds
- Low ink level alarm, print ready, remote control on/off
- Memory
- 999 messages for a single SD card
- Printable elements
- alphanumeric writings, logos, date / time, codes, counter, lot and barcode
- Printable barcode
- Code-128, ITF-14(SCC-14), NVE(SSCC-18), EAN-128, PDF417, Data Matrix, QR Code, DUN-14, GS1 DataBar, UPCA, UPCE, EAN-13, EAN-8, Code 25 Interleaved, Codabar, Code-39
- Interface
- RS485 & USB
- Supply
- AC 100V-240V, 50/60 Hz
- Operating temperature
- 5°C-40°C
- Dimensions
- 114x76x60 h mm
- Weight
- 0,50 Kg (without cartridge)
- Category
- Packaging Machinery in Italy
- Subcategory
- Packing
- Subcategory 2
- Inkjet markers
- Subcategory 3
- Codes and lots marking
- Listing ID
- 94237258
Description
PROMOTION
professional inkjet marker,
maximum printing height mm. 12.7.
With 420 ml external tank.
PROFESSIONAL INKJET MARKER MOD. FPA2-DSL- MAXIMUM PRINTING HEIGHT 12.7 mm - complete with brackets and external tank
PROMOTION (FPA2-DSL MARKER + ONE FREE CARTRIDGE)
The DSL professional inkjet marker is suitable for marking on porous surfaces (cartons, cartons).
Thanks to the external ink tank, it is possible to position the marker on automatic lines and save considerably on consumables and cartridge replacement times.
The cartridges contain 420 ml.
The cost of printing is about 5 times lower than the other FPA2 series markers.
It allows to print alphanumeric texts, logos, date / time, codes, counter, lot and 1D & 2D barcode, distributed on different lines with a total height of 12.7 mm. The minimum printing height is about 5.4 mm. The marking speed can be set directly on the marker keypad and it is therefore possible to write accurately and without deformation of the characters.
$1,961 USD