Microtrac SYNC Combining Laser Diffraction with Dynamic Image Analysis in Worthington, OH, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Measuring range
- 0.01 µm - 4 mm
- Measuring principle
- Laser Diffraction (ISO 13320)Dynamic Image Analysis (ISO 13322-2)
- Precision*
- Spherical glass beads D50 = 642 microns, precision as CV = 0.7% Spherical glass beads D50 = 57 microns, precision as CV = 1.0% Spherical latex beads D50 = 0.4 microns, precision as CV = 0.6%
- Laser class
- Red 780 nm, blue 405 nm Class 1 laser product per CFR 1040.10 & IEC60825-1
- Laser power
- Red laser 0.35 to 2 mW nominal Blue laser 4-8 mW nominal
- Detection system
- Two fixed photo-electric detectors with logarithmically spaced segments are placed at correct angles for optimal scattered light detection from 0 to 165 degrees using 151 detector segments.
- Data
- Volume, number and area distributions as well as percentile and other summary data
- Data format
- Stored in ODBC format in encrypted Microsoft Access Databases to ensure compatibility with external statistical software applications.
- Data integrity
- Data integrity may be ensured using FDA 21 CFR Part 11 compliant security features including password protection, electronic signatures and assignable permissions
- Type of analysis
- dry and wet analysis
- Measuring time
- ~ 10 to 30 seconds
- Power requirements
- AC input: 90 - 264 VAC, 47 - 63 Hz, single phase
- Power consumption
- 25 W nominal, 50 W max., depending on options installed
- Environmental conditions
- Temperature: 5° to 40° Celsius (50° to 95° Fahrenheit) Humidity: 90% RH, non-condensing maximum Storage Temperature: -10° to 50° Celsius (14° to 122° Fahrenheit) (dry only) Pollution: Degree 2
- Standards
- Laser Diffraction (ISO 13320)Dynamic Image Analysis (ISO 13322-2)Representation of results of particle size analysis (ISO 9276-6)
- Image analysis
- 5.2 megapixel (2560 x 2048), 22 fps at max resolution
- Wet operation
- Volume: 200 ml nominal Flow rate: 0 to 65 ml/sec with water Inlet pressure: 50 psig (345 kPa) maximum
- Dry operation
- 100 psi (689 kPa) maximum pressure 5 CFM (8.5 m3/h) at 50 psi (345 kPa) minimum flow rate Free of dry contaminants, moisture and oil
- Vacuum
- Vacuum must meet or exceed 50 CFM (85 m3/h)
- Physical specifications
- Case Material: Impact resistant plastic Exterior surfaces are finished with corrosion resistant paint or plating Chemical Compatibility: Class I
- Dimensions (w x h x d)
- ~ 820 x 460 x 500 mm (32.3 x 18.1 x 19.7 in)
- Weight (measuring unit)
- FlowSync: 19.5kg (43lbs)TurboSync: 13.6kg (30lbs)Sync: 23.6kg (50.8lbs)
- Subcategory
- Sync
- Subcategory 2
- Laser diffraction
- Subcategory 3
- Particle size & shape analysis
- Listing ID
- 92640612
Description
A New Dimension in Particle Analysis
With the SYNC particle analyzer, Microtrac integrates its highly accurate tri-laser diffraction analyzer technology with its versatile dynamic image analysis capability to provide particle characterization practitioners with a unique measuring experience. The patented synchronous measurement technology allows users to make both a laser diffraction measurement and an image analysis measurement on a single sample, in the same sample cell at the same time:
One sample
One optical bench
One flow path
One sample cell
One analysis
The SYNC laser diffraction particle size analyzer is ideally suited for routine QC applications. It also provides valuable information to researchers as they develop new materials and processes. The powerful analyzer software provides both particle size distribution information as well as a multitude of morphological particle parameters.