ASTM – Compression Testing Frames for Blocks (UTC-4706) in Alberton, Gauteng, South Africa
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- UTC-4706
- Standards
- ASTM C140, C1314
- Utc-4706
- 1100 kN (245000 lbf) Compression Testing Frame for Blocks, ASTM
- Utc-4716
- 1500 kN (335000 lbf) Compression Testing Frame for Blocks, ASTM
- Utc-4726
- 2000 kN (450000 lbf) Compression Testing Frame for Blocks, ASTM
- Utc-4736
- 3000 kN (670000 lbf) Compression Testing Frame for Blocks, ASTM
- Utc-4680
- Pedestal for 600kN (135000 lbf) and 1100kN (245000 lbf) Compression Testing Frames
- Utc-4682
- Pedestal for 1500 kN (335000 lbf), 2000 kN (450000 lbf) and 3000 kN (670000 lbf) Compression Testing Frames
- Models
- UTC-4706
- Capacity
- 1100 kN (245000 lbf)
- Frame type
- Welded Steel
- Lower bearing block, dimensions (d)
- 310x410x90mm (12.2”x16.1”x3.5”)
- Upper bearing block, (with spherically seating assembly) dimensions (c)
- 310x410x90mm (12.2”x16.1”x3.5”)
- Surface hardness of bearing blocks
- 60 HRC
- Flatness tolerance
- 0,025 mm / 150 mm (0,001”/6”)
- Piston diameter
- 230 mm (9,06”)
- Piston stroke
- 50 mm (1,97”)
- Maximum vertical clearance between bearing blocks (e)
- 250 mm (9,84”)
- Horizontal clearance (b)
- 320 mm (12,6”)
- Dimensions (wxlxh) (axd*xf)
- 380x451x1104 mm (14,96”x17,76”x43,86”)
- Weight
- 723 kg (1595 lbs)
- Pedestal (optional)
- UTC-4680
- Subcategory
- Concrete
- Subcategory 2
- Astm & aashto - compression testing frames
- Listing ID
- 91070203
Description
Compression Testing Frames
Product Code:
Description:
ASTM & AASHTO compression testing frames for blocks consist of a rigid welded steel walls, a loading cylinder assembly and lower and upper (spherically-seated) bearing platens.
The frames provide the stability needed for accurate and repeatable test results over the years of operation.
Any hydraulic power pack with control and read out unit and a pressure transducer for measuring the loads, can be positioned on the right-hand side of the load frame for easier accessibility, increased productivity and for safer operations.
All frames have a single acting up stroking ram and also have front and rear protective doors and limit switch for piston stroke for safety.
The diameter of the pistons is designed to work with the load capacity.
The lower bearing platens are provided with centring line/s