CTM Model 3600-PA Labeler Dual Action Tamp Printer Applicator with Portable Stand and Parts Unit in Hortonville, WI, USA

There is also a parts unit that will come with this system.

See photo of parts system.

Specs below:

The 3600-PA Dual Action Tamp (DAT) Printer Applicator is a high speed, thermal transfer labeler used to print and apply pressure sensitive labels that can be programmed for single or two panel labeling applications applied to various cartons, cases or pallets.

The single panel can be applied to either the front or the side.

Sato or Zebra print engine integrated into the applicator to print variable data.

Can be mounted in almost any position to apply labels to the leading, side or trailing panels of various products. Mounting can be oriented up or down depending upon label size and position on the product.

Short height actuator assembly allows the unit to reach over a conveyor to products which are not at the edge of the conveyor

4" tall labels can be located 1/4" from the bottom of products.

Right hand or left hand version for either side of conveyor

Up to 7.1" wide labels, up to 6.6" print width

Built-in bar codes and alpha-numeric fonts

Proven tamp-blow application

PLC control

User-friendly operator interface with easy-to-read

LCD display

Quick access to set-up parameters

Rugged and versatile for standard and custom applications

Equipped with multiple onboard I/O signals prewired to external connectors

Dimensions

Dependent Upon Line Configuration

Weight Approx. 150 lbs.

Electrical 108-132 Volts AC, 5 Amps,54/60 Hertz, Single Phase

Pneumatic 90 PSI., 3-5 CFM

Communications RS 232, Parallel -

Environmental Operating 41o F to 104o F (5o C to 40o C)

Storage -4o F to 104o F (-20o C to 40o C)

Printing Method Thermal Transfer, Direct Thermal

Print Resolution 203 or 305 dpi, Dependent Upon Print Engine

Product Sensing Photoelectric, PLC Input

Applicator Control Micro PLC with Operator Key-Pad and 2-Line Display

For Print Speed, Fonts, Bar Codes or Graphics,

See Programming Manual of Printer Manufacturer.

The 3600a-PA printer applicator is a high-speed labeler used to thermally print and apply pressure sensitive labels to moving products.

A thermal transfer printer is integrated into an applicator to form a self contained unit that will print variable data onto a label.

The printer/applicator can be mounted in almost any position adjacent to product flow to apply labels to top, sides or bottom of products as they pass by

If you need any additional information, just let us know and we will be glad to assist.

200 dollars to crate the system to ship common carrier

Please inquire for shipping rates