PID Controller Temperature And Humidity Controlled Chambers Digital Display in Dongguan, Guangdong, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Temperature range (℃)
- F: -20℃, L: -40℃, T: -60℃, G: -70℃ ~ 150℃
- Humidity range (%rh)
- 20%R.H ~ 98%R.H
- Temperature fluctuation (℃)
- ±0.5℃
- Temperature uniformity (℃)
- ≤ ±2℃
- Humidity fluctuation (%rh)
- ±2.5%RH
- Heating rate (℃)
- 3℃/min (No-load)
- Cooling rate (℃)
- 0.7 ~ 1℃/min (No-load)
- Temperature and humidity control system
- LCD digital display controller.
- Heated humidification system
- Nichrome wire-efficiency heater, UL-shaped stainless steel plating heater
- Inner material
- SUS#304 Stainless Steel.
- Outer material
- Spray Color Galvanized Steel Sheet.
- Insulation materials
- Ultra-fine Glass Fiber Insulation Cotton.
- Communication
- Equipped with a standard RS232C / RS485 communication interface, the maximum transmission distance of 1.2Km, the fastest communications up to 9600bps, can be realized with a computer connected to the remote monitoring, easy to operate.
- Subsidiary function
- Fault alarm and reason prompts, you can change the name of the fault, the upper temperature limit protection, timing and the reservation (automatic stop and start function), multiple (up to 6 groups) PID temperature control separate segments, curve display and save the function display PV curve 0-8 days. Temperature can be set according to the linear operation (liters can set per hour up / cooling rate).
- Humidity range
- 20%R.H ~ 98%R.H .Normal
- Temperature range
- -20℃ ~ 150℃(lowest About -70℃)
- Inner cabinet (mm)
- 40×40×50,50×60×75cm And Other Sizes
- Highlight
- temperature humidity test equipment, temperature humidity chamber
- Packaging details
- Standard exported wooden case
- Payment terms
- T/T, L/C, Western Union
- Supply ability
- 50 Sets Per Month
- Category
- Environmental Chambers in China
- Subcategory
- Temperature humidity test chamber
- Listing ID
- 88881723
Description
> 75%RH: ≤+2, -3%RH;
<75%RH: ≤±5%RH
Compressor: French imported hermetic compressors.
Refrigerant: Environmentally friendly refrigerant R404A, the destruction of the ozone layer was 0 (ODP = 0.00).
Condenser: Fin-type with the cooling motor.
Evaporator: Fin-type multi-stage automatic load capacity adjustment.
Other accessories: Desiccant, repair valves, solenoid valves in Japan.
Expansion systems: Capacity automatic control throttling of the refrigeration system.
Power cable 4.0 mm² x 5 cores, low-impedance rubber cable 3m x 1.
SUS # 304 square punching stainless steel shelf x 2.
Stainless steel adjustable shelf track pitch of 2 groups.
An energy-efficient lighting.
Machine left Փ50mm a test hole attached stainless steel manhole cover, and with a silica gel plug.
Standard Test Meteorological gauze Volume x 1.
Fuse set x 1 set (wearing parts).
Operation Manual x 1.
Under same volume have a larger place space and load heat.