PC/PPI+:RS232 to PPI optoelectronic isolated adapter for Siemens S7-200 PLC,replace 6ES7 901-3CB30-0XA0 in Shenzhen, Guangdong, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Isolation voltage
- 1000VDC(The maximum to 3000 VDC, orders required statement)
- Temperature
- -40～85'C(products available for sale since January 2008)
- 10 bits modem refers
- 1 outset bit, 8 data bits, no parity bit, and 1 stop bit(or 7 data bits,1 parity bit).This kind of MODEM is comparative common on the market.
- 11 bits modem refers
- 1 outset bit, 8 data bits, 1 parity bit (Occasionally bit check), and 1 stop bit .
- Accessories of replacements
- Orignal Siemens Model
- Profibus bus connector（90 without program interface）
- 6ES7972-0BA12-0XA0
- Profibus bus connector（90 with program interface）
- 6ES7972-0BB12-0XA0
- Profibus bus connector（35 without program interface）
- 6ES7972-0BA41-0XA0
- Profibus bus connector（35 with program interface）
- 6ES7972-0BB41-0XA0
- Profibus bus connector
- 6GK1 500-0FC00
- Profibus bus cable
- 6XV1840-2AH10
- 20-pin front connector
- 6ES7392-1AJ00-0AA0
- 40-pin front connector
- 6ES7392-1AM00-0AA0
- Cp5611 card
- 6GK1561-1AA01
- Plc li-on battery
- 6ES7291-8BA20-OXAO
- Ps307 power supply 5a
- 6ES7307-1EA00-0AA0
- Ps307 power supply 10a
- 6ES7307-1KA02-0AA0
- Din track（830mm）
- 6ES7390-1AJ30-0AA0
- Din track（530mm）
- 6ES7390-1AF30-0AA0
- Din track（480mm）
- 6ES7390-1AE80-0AA0
- Hot-plug track（530mm）
- 6ES7390-1GF30-0AA0
- Ppi-rs485 plug
- PC-RS232 plug
- Pin
- Signal explanation; Pin; Signal explanation
- 2
- 24V Power source negative（RS485 Logical place）; 2; Receive data RD（Output from PC/PPI）
- 3
- RS485 signal B（RxD/TxD ）; 3; Send data SD（Send to PC/PPI）
- 7
- 24V Power source positive; 4; Data terminal ready DTR
- 8
- RS485 signal A（RxD/TxD-）; 5; Ground（RS232 Logical place）
- 9
- Agreement choice; 7; Require to send RTS
- Subcategory
- Plc,hmi cable
- Subcategory 2
- Siemens programming cable
- Listing ID
- 88337170
Description
Optoelectronic isolated PC/PPI cable,support 10 bit and 11 bit modem communication,with communication indicator,automatically adjust the baud rate from 0 to 115.2Kbps,the largest communication distance of up to 2 kilometers.Not support multi-master statio
New OEM Siemens S7-200 PC/PPI PLC Programmer Cable
If you need non- isolated cable,pls choose PC/PPI,you can click the following website for PC/PPI:
PC-PPI
,
The quality is 's tested before shippment.
optoelectronic isolated PC/PPI cable,support 10 bit and 11 bit modem communication,with communication indicator,automatically adjust the baud rate from 0 to 115.2Kbps,the largest communication distance of up to 2 kilometers.Not support multi-master station communication.,5M.
Specifications:
The OEM Siemens S7-200 PC-PPI Programming cable supports full range of Siemens S7-200 PLC programming. It is 100% good replacement for the expensive Simens cable..