DMG MORI DECKEL MAHO HSC 55 linear in Germantown, WI, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Year
- 2008
- Stock number
- 064374
- Status
- Available
- Number of axis
- 5-Axis
- Tool changer
- 30 ATC
- Control
- HH iTNC 530
- Spindle
- 18,000 rpm
- Spindle taper
- HSK-A63 DIN 69893
- X axis
- 17.7" (450 mm)
- A axis
- +10/-110 degrees
- Y axis
- 22.8" (580 mm)
- Z axis
- 15.7" (400 mm)
- C axis
- 360 x 0.001 degrees
- Http
- //youtu.be/MwZCuTlSKeY
- Original build date
- 07/2008
- Maximum workpiece diameter
- 17.7" (450 mm)
- Maximum workpiece height
- 13.8" (350 mm)
- Maximum workpiece weight
- 440.9 lbs (200 kg)
- X-axis
- Size 1.77" (45 mm), distance 16.53" (420 mm)
- Y-axis
- Size 1.37" (35 mm), distance 35.00" (890 mm)
- Z-axis
- Size 1.37" (35 mm), distance 12.59" (320 mm)
- C-axis
- 360 degrees Rotation Range (110 rpm !)
- A-axis
- +10/-110 degrees Tilting range (110 rpm !)
- Distance spindle nose to table
- 4.1"-19.8" (105 mm-505 mm)
- Clamping area trunnion table
- 15.7" x 15.7" (400 mm x 400 mm)
- Maximum table load
- 440 lbs (200 kg)
- Drive
- Linear motors in X, Y, Z-axis, Torque motors in A and C-axis
- Spindle speed range
- 20-18,000 rpm
- Spindle power 40/100% dc
- 54.98 hp/40.23 hp (41 kW/30 kW)
- Magazine places
- 30 pockets
- Maximum tool diameter
- 3.14" (80 mm) with free neighboring pockets
- Maximum tool length
- 9.84" (250 mm)
- Maximum tool load
- 13.2 lbs (6 kg)
- Feed rate
- X, Y and Z-axis maximum 3,150 ipm (80,000 mm/min)
- Rapid feed
- X, Y, and Z-axis 262 ft/min (80 m/min)
- Rapid feed a-axis
- 110 rpm
- Rapid feed c-axis
- 110 rpm
- Acceleration
- Up to 2g
- Clamping torque rotary axis
- 1,475 ft/lbs (2,000 Nm)
- Clamping torque swivel axis
- 1,475 ft/lbs (2,000 Nm)
- System
- Direct absolute X/Y/Z Axis, absolute encoders A/C Axis
- Input resolution
- 0.0000039" (0.0001 mm)
- Category
- Machining Centers in USA
- Subcategory
- 5-axis machining centers
- Listing ID
- 83657343
Description
5-AXIS MACHINING CENTERS
DECKEL MAHO HSC 55 linear
SUBJECT TO AVAILABILITY, AND TERMS AND CONDITIONS
FOLLOWING, WE OFFER FOR YOUR CONSIDERATION:
One used 2008 DMG MORI DECKEL MAHO HSC 55 linear 5-Axis Machining Center:
See VIDEO of 110 rpm Rotary Swivel Table at:
See VIDEO of 5-Axis High Speed Cutting on a HSC55 at:
May be inspected in US plant under power by appointment
Machine was made at Deckel Maho Seebach GmbH in Seebach, Germany
Hours Approx 7,027 spindle on hours TOTAL over the LIFE of the machine
TECHNICAL DATA:
HSC-Precision Centre HSC 55 linear in Bridge Type design
NEW DMG Design
CONTROL:
3D-Control Heidenhain iTNC 530
Operator screen SmarT.NC
DMG ERGOline Control, 19" display
Options on the control:
Electronic handwheel
Ethernet Data lines and adapter
Application Tuning Cycle ATC-Software selection of the optimal milling
mode for the current machining
-MAXIMUM WORKPIECE DIMENSIONS-
WORKING AREA:
Table has absolute measuring systems including permanent cooling of A and
C-axis motors
MAIN DRIVE:
TOOL MAGAZINE:
Chain with double gripper with linear axis for pickup-change
Tool changer and tool magazine integrated in machine cabin
FEED DRIVES:
GUIDEWAYS:
Roller guide ways in all linear axis
LINEAR MEASURING SYSTEM:
MEASURING:
BLUM Laser Tool Measuring for tool length and diameter
Renishaw OMP 60 infrared touch probe
Machine preparation for use of the 3D quickset Toolkit
Signal lamp, 4 colours
COOLING MEDIA/CHIP REMOVAL:
Scraper type chip conveyor, discharge height 37.4" (950 mm)
High Pressure Air blast through spindle centre, activated by M function
and softkey, maintained air with a light lubrication
Working area flushing, including door flushing pipe, with rotating
clear-view window
6 nozzles for outer coolant supply, delivery rate approximately 36.25 psi
(2.5 Bar) at 10.56 gallon/min (40 l/min).
Coolant tank capacity 39.62 gallon (150 l)
Coolant-airblast changeover (6 nozzles for coolant, 4 nozzles air blow)
CENTRAL LUBRICATION:
Automatic minimum lubrication for roller guideways
ELECTRICAL CABINET:
With active cooling unit
WORKING HOUR RECORDING:
On the electrical cabinet for control voltage on and programme run-time
CABIN:
Full cabin with sliding door
DMG LIGHTline provides optimal visibility of the machine status
MACHINE LAMP:
Planon-light
MACHINE WEIGHT:
Approximately 20,943 lbs (9,500 kg)
EQUIPPED WITH:
Active chiller for main spindle and linear drives
Active chiller for electrical cabinet
Direct absolute measuring system with air purge
Coolant-airblast changeover
Miscellaneous HSK-A63 tool holders
Technical specifications are subject to verification by Buyer.
APPROXIMATE WEIGHT 20943#