G3304B Gas Compression Engine in Mesa, AZ, USA
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Maximum rating
- 95 BHP
- Emissions
- Rich Burn: EPA NSPS Site Compliant Capable with Caterpillar or Customer Supplied AFRC & Aftertreatment
- Displacement
- 425 in³
- Cooling system
- 4.23 gal (US)
- Lube oil system - refill
- 8.19 gal (US)
- Minimum rating
- 95 BHP
- Compression ratio
- 10.5:1
- Aspiration
- Naturally Aspirated
- Rotation from flywheel end
- Counterclockwise
- Flywheel and flywheel housing
- SAE No. 1
- Flywheel teeth
- 156
- Weight - dry
- 1,670 lb
- Oil change interval
- 750
- Ignition, protection
- ADEM™ A4
- Air/fuel ratio control
- ADEM™ A4
- Stroke
- 6 in
- Bore
- 4.75 in
- Length
- 46 in
- Width
- 29 in
- Rated speed
- 1,800 rpm
- Category
- Generator Sets in Arizona
- Subcategory
- Gas compression engines
- Listing ID
- 82813717
Description
Air cleaner — intermediate duty, dry
Air cleaner rain cap (shipped loose)
Service indicator
ADEM A4
Thermostats and housing — full open temperature 97°C (207°F)
Jacket water pump — gear-driven, centrifugal, non-self-priming
Exhaust manifolds — watercooled
Exhaust elbow — dry 102 mm (4 in)
Three-way catalyst — 1.0 g and 0.5 g NOx catalyst options
Flywheel, SAE No. 1
Flywheel housing, SAE No. 1
SAE standard rotation
Air/fuel ratio control
Gas pressure regulator
Requires 10.3-68.9 kPa (1.5-10 psi) gas
Natural gas carburetor
ADEM A4 ignition
Crankcase breather, top mounted
Oil cooler
Oil filter
Oil pan, full sump
Oil filler and dipstick
The following parameters include alarm and shutdown
24V, 35A alternator
24V, 35A CSA alternator*
Radiators
Jacket water pump inlet adapter
Exhaust flex fitting — ANSI flange
Exhaust elbow
Catalyst harness
ANSI flange
CSA certified electronics and ignition*
Operator interface panel
Operator interface panel enclosure
15', 25' and 50' interconnect harness