Computer Controlled Battery Servo Motor Crush Testing Machine in Dongguan, Guangdong, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Power
- 380V,50~60HZ,
- Design standard
- UN38.3, IEC62133,SAE_J2464 ,UL2054, UL1642 ect.
- Effective squeeze space
- W300*D300*H200mm(or custom with the battery size)
- Crush stroke
- 200mm
- Drive
- Hydraulic or servo motor
- Crush plate diameter
- φ150*10(thick)mm
- Controller
- Computer control with the specialized sofware
- Hydraulic ram diameter
- 32mm
- Power transmission method
- Hydraulic or Servo
- The pressure
- 13kN
- Accuracy of the force display
- 0.1N
- Resolution
- 1/10000
- Compression space
- W300*D300*H200mm(or custom with the battery size)
- Distance of compression
- 200mm
- Holding time
- 1s~9999h( arbitrary set)
- Cable port
- Diameter 50mm on the left side of the chamber
- Interior material
- SUS#304
- Exterior material
- A3 steel paint drying
- Demension (mainframe)
- 66*53*168cm
- Demension (controller)
- 55*35*100cm
- Place of origin
- China
- Certification
- UN 38.3
- Minimum order quantity
- 1set
- Packaging details
- Non-fumigation wooden box
- Payment terms
- FOB Shenzhen
- Supply ability
- 10 set/batch
- Material-function
- Stainless SteelBattery Crush Test
- Maximum force-drive
- 20 KNHydraulic Or Servo Motor
- Stroke-standard
- 200mm Or 300mmUN38.3, IEC62133,SAE_J2464 ,UL2054, UL1642
- Highlight
- battery testing instruments, battery testing machine, Servo Motor Crush Testing Machine
- Category
- Materials Testing in China
- Subcategory
- Testing equipment
- Subcategory 2
- Battery testing equipment
- Listing ID
- 64416117
Description
The batteries are to be tested in an ambient temperature of 20 ±5℃.Each fully charged cell is to be crushed between two flat surfaces. The force for the crushing is to be applied by a hydraulic ram exerting a force of 13kN .The crush is performed in a manner that will be cause the most adverse result. Once the maximum pressure has been applied or an abrupt voltage drop of one third of the original voltage has been applied, or 10% of deformation has occurred compared to the initial dimension, the force is released (whichever condition occurs first should be the indication that the force should be released). A cylindrical or prismatic battery is to be crushed with its longitudinal axis parallel to the flat surfaces of the crushing apparatus. A prismatic battery is also to be rotated 90 degree around its longitudinal axis so that both the wide and narrow sides will be subjected to be crushing force. Each sample battery is to be subjected to a crushing force in only one direction.