CLAMP ON SENSOR 9695-02 in Nagano, Japan
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Rated measurement current
- 50 A AC
- Max. measurement current
- Continuous 60 A (45 to 66 Hz)
- Output rate
- 10 mV AC/ A
- Amplitude accuracy (45 to 66 hz)
- ±0.3 % rdg. ±0.02 % f.s. (*1)
- Phase accuracy
- ±2° (45 Hz to 5 kHz)
- Amplitude frequency characteristics
- Within ±1% at 40 Hz - 5 kHz (deviation from amplitude accuracy)
- Max. rated voltage to earth
- 300 V AC rms or less (Insulated conductor)
- Measurable conductor diameter
- φ 15 mm (0.59 in) or less
- Operating temperature and humidity
- 0°C to 50°C (32°F to 122°F), 80% RH or less (no condensation)
- Dimensions and mass
- 50.5 mm (1.99 in)W × 58 mm (2.28 in)H × 18.7 mm (0.74 in)D, 50 g (1.8 oz) Output terminal : M3 terminal (outside 3 mm, 0.12 inch diameter) Option: Connection cable 9219 (3 m, 9.84 ft length)
- Category
- Sensors in Japan
- Subcategory
- Ac current sensors, up to 50 khz
- Listing ID
- 61137981
Description
Insulated conductor
Hioki current sensors are best-in-class devices for use with power meters, and PQAs. The 9695-02 is a 50 A AC clamp sensor with voltage output for measuring load current.
CAT III 300V
High ±0.3% accuracy
For inverter devices or commercial power lines
For power meters and power loggers (may require the 9219)
Fits in narrow spaces due to compact design