CLAMP ON SENSOR 9272-05 in Nagano, Japan
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Rated current
- 20 A AC, or 200 A AC (selectable)
- Max. allowable input
- 50 A rms (at 20 A range), 300 A rms (at 200 A range)
- Frequency characteristics
- 1 Hz (±2 % rdg. ±0.1 % f.s.) to 100 kHz (±30 % rdg. ±0.1 % f.s.)
- Amplitude and phase accuracy
- Amplitude: ±0.3 % rdg. ±0.01 % f.s. Phase: ±0.2 ° (45 to 66 Hz)
- Output voltage
- 2 V/20 A or 2 V/200 A (This device outputs AC voltage via the Sensor Unit)
- Max. rated voltage to earth
- 600 V rms (CAT III)
- Core diameter
- φ 46 mm (1.81 in)
- Power supply
- Power suppled via the Power Analyzer PW8001, PW6001, PW3390, Sensor Unit CT9555, CT9556, CT9557, or 3CH CURRENT UNIT U8977
- Power consumption
- 5 VA Max. (when measuring 200 A)
- Dimensions and mass
- 78 mm (3.07 in) W × 188 mm (7.40 in) H × 35 mm (1.38 in) D, 430 g (15.2 oz), cord length: 3 m (9.84 ft)
- Included accessories
- Carrying case 9355 ×1, Instruction manual ×1, Mark bands ×6
- Compatible models
- 9272-10 (Discontinued product)
- Power analyzer pw3390
- △ (Requires CT9900)
- Power analyzer 3390
- OK
- Power hitester 3193 series
- OK
- Current unit 8971
- △ (Requires the 9318)
- F/v unit 8940
- △ (Requires the 9318, 9705)
- 3ch current unit u8977
- △ (Requires the CT9900)
- Category
- Sensors in Japan
- Subcategory
- Ac current sensors, up to 50 khz
- Listing ID
- 61137974
Description
Hioki current sensors are best-in-class devices for use with power meters, Memory HiCorders and high performance oscilloscopes. The 9272-10/9272-05 are a 1 Hz to 100 kHz AC current sensor ideal for measuring low frequency equipment such as inverters.
CAT III 600 V
Use with an instrument with a high input impedance of 1 MΩ or higher.
Superior low frequency and phase characteristics suitable for testing the current and power of inverter control devices
Wide 1 Hz to 100 kHz frequency bandwidth perfect for harmonic analysis, FFT analysis and waveform monitoring (AC only)