Blast cabin SU-93/80/80-PL in Álava, Spain
Used
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- used
- Cab exterior dimensions length
- 930 mm
- Cabin external dimensions width
- 800 mm
- Cab exterior dimensions high
- 1700 mm
- Cab interior dimensions length
- 930 mm.
- Cab interior dimensions width
- 800 mm
- Cab interior dimensions height
- 800 mm
- Long suction cupboard
- 700 mm
- Wide suction cupboard
- 580 mm
- High suction cupboard
- 1340 mm.
- Total weight
- 360 Kg
- Total consumption
- 1kW
- Subcategory
- Blast cabin
- Subcategory 2
- Processing equipment
- Subcategory 3
- Surface treatments and electroplating equipment
- Listing ID
- 50125999
Description
SU-93/80/80 suction sandblasting cabin in 2mm white sheet.
Cabin outside dimensions:
Suction cabinet.
Net weight of the suction cabinet is 160 Kg. Approximately
Air consumption 1000l/min
Three-phase power supply 380V 50Hz
Equipped with the following COMPONENTS:
Bottom in the shape of an inverted pyramid trunk in the lower part of which the abrasive absorption device is placed.
Interior lighting by means of two lamps protected by hermetically sealed lampshade.
Observation window with interchangeable safety glass mounted on a completely watertight rubber frame.
Side door for loading / unloading of parts.
Perforated platform duly reinforced to support the parts to be treated.
Two openings with conical sleeves and gloves adapted to them for the operator's hands, located at the front of the booth.
Two outlets for suction of the dust produced inside the booth with butterfly valve for regulation.
A spray gun MODEL 750, equipped with a 7 mm widia nozzle.
Set of hoses for the passage of compressed air and abrasive to the gun.
A blowing gun to remove the remains of abrasive or dust from the treated parts.
A set of filter, pressure gauge and pressure regulator for purification and regulation of the compressed air.
A foot valve to control the air flow to the spray gun.
Extraordinarily effective for the application of light to medium abrasives such as:
Glass beads
Ground glass
Corundum
Sand and silica
Vegetable husks
Ground slag
The dust-laden air is drawn into the dust collector. There it passes through the filter cartridge, where the dust and abrasive particles are deposited on the outer walls of the cartridges, and the clean air passes through the fan and is discharged to the outside.
The particles collected on the filter elements of the collector are periodically removed by injecting compressed air into the interior of the cartridge (cellulose microfiber). When the air is injected, the dust falls to the bottom of the hopper and is deposited in a container for later disposal.