Dionex Ics-5000 Ion Chromatography System in Markham, Ontario, Canada

Specifications

Condition
refurbished
Stock number
Dionex-02-0630
Pressure range
0–41 MPa (0–6000 psi)
Flow rate range
Analytical: 0.000–10.000 mL/min with settable flow increments at 0.001 mL/min Capillary: 0.001–3.000 mL/min with settable flow increments at 0.0001 mL/min
Flow rate precision
<0.1%
Flow rate accuracy
<0.1% at 14 MPa (2000 psi)
Pressure ripple
Analytical: < 1.0% at 1.0 mL/min typical Capillary: < 0.2% (with damper) or < 1.0% (without damper) at 10 μL/min
Pressure
None required
Vacuum degasser
Integrated degasser with 1 channel for isocratic pump or 4 channels for quaternary pump; optional
Piston seal wash
Automatic operation, standard
Gradient formation
Quaternary low pressure (Analytical only) or electrolytic eluent generation at high pressure (Analytical and Capillary)
Rfic-eg gradients
Analytical: 0.1–100 mM Capillary: 0.1–200 mM
Gradient profiles
Standard—any combination of an unlimited number of linear, convex, and concave positive and negative gradient profiles
Gradient proportioning accuracy and precision (analytical only)
±0.5% at 2 mL/min
Gradient mixing (analytical only)
Passive mixers for 2 mm and 4 mm ID columns, Optional
Eluent generation
Eluent generation (RFIC-EG), optional
Eluent on/off valve
Electrically-actuated, standard
Leak sensor
Optical, standard
Minimum and maximum eluent concentrations
0.01–100 mM (Analytical) 0.01–200 mM (Capillary)
Flow rates
0.100–3.000 mL/min (Analytical) 0.001–0.030 mL/min (Capillary)
Eluent types
KOH, LiOH, NaOH Carbonate Carbonate/bicarbonate Carbonate with pH modifier MSA
Maximum operating pressure
35 MPa (5000 psi)
Maximum solvent concentration
Cations: None Anions: 25% methanol
Number of cartridges supported
Two—dual cartridge support
Dc models:
Dual Temperature Model Only
Dual temperature model: independent temperature control
Upper Section Temp. Range: 10–40 °C Lower Section Temp. Range: 10–70 °C Temperature Accuracy:  ± 0.5 °C Temperature Stability: ± 0.2 °C Temperature Precision: ± 0.2 °C
Lower zone: (analytical)
Injection valves: 1 or 2 ea., 6 or 10 port Up to two column sets, 1–9 mm Maximum column length: 250 mm Precolumn heat exchangers: 2
Cap ic cube: (optional – but required for capillary chemistries)
1 or 2 IC Cube™ modules hold the following: Injection Valves: Up to 2 (one per cube) high pressure valves, 4-port, 2 position EG Degasser Column and Guard Carbonate Removal Device Capillary Suppressor (See Suppressor section) IC Cubes and cartridges are customer installable with preformed tubing and color-coded labeling Capillary column heater 15 to 85 °C
Automation manager: (optional)
Injection valves: Up to 2 ea., high pressure valves, either 6 or 10 port Low pressure valves: Up to 2 ea., PTFE, 2 or 3 way Reaction Coil Heater: Holds up to two reaction coils Temperature Range: 5 °C above DC, up to 80 °C
Leak detection:
Optical leak sensor
Injections per vial
1 to 99
Vial sizes available
0.3 mL polymer vials (P/N 055428, package of 100) 1.5 mL glass vials (P/N 055427, package of 100) 10 mL PolyVials (P/N 055058, package of 100)
Variable volume range
1 to 100 µL in 0.1 µL increments 100 to 1000 mL in 1 µL increments
Injection loop size
IC version: 25 µL standard; other sizes are available HPLC version: 20 µL standard; other sizes are available
Injection
Two-position, six-port, electrically-activated Rheodyne valve IC version: PEEK with Tefzel® rotor seal HPLC version: Stainless steel with Vespel® rotor seal
Column switching
Two-position, ten-port, electrically-activated Rheodyne valve IC version: PEEK with Tefzel rotor seal HPLC version: Stainless steel with Vespel rotor seal
Listing ID
26189195

Description

Features
The ICS-5000 Reagent-Free™ IC (RFIC™) system with Eluent Generation is the world’s first capillary IC system. Developed with flexibility, modularity, and ease-of-use in mind, the ICS-5000 combines the highest sensitivity with convenience.
With the ability to analyze samples at capillary, microbore, or standard flow rates (or any combination of two, in a dual system), the system is simply Always Ready. The wide variety of ICS-5000 modules allows you to configure an ion chromatography system designed specifically to provide the solutions you need.
The Dionex ICS-5000 is the first system with an all-PEEK flow path capable of operating continuously at 5000 psi. Reagent-Free HPIC systems redefine the way ion chromatography is performed.
Dionex ICS-5000 Dual Pump (DP)

Dionex ICS-5000 Eluent Generator (EG)
Dionex ICS-5000 Detector/Chromatography Module
Dionex AS-50 Autosampler
A 90-day warranty
Dionex ICS-5000 Dual Pump(DP)
Dionex ICS-5000 Eluent Generator (EG)

Services offered by seller

This Seller offers repair & maintenance services

This seller offers spare parts

Seller Reviews

07/03/2025

We are very happy with the seller for this purchase. Specially happy that they can stick to the quote pricing without adding additional cost such as tariff, handling, etc.

08/03/2022

Excellent service, top quality equipment.

06/27/2022

Seller is flexible in system configuration and is cooperative to customer's needs

12/21/2021

Very knowledgable and listened to the customer about budget and needs

Contact Seller for Price

Manufacturer
Thermo Fisher Scientific
Model
Dionex ICS-5000
Type
High-Performance Liquid Chromatography (HPLC)
Location
🇨🇦 Markham, Ontario, Canada

Interested in this machine?

This seller has been contacted 11 times in the last week.

Trusted Seller

4.75

Seller languages

Get Financing

Our financing partner can help you get fast, easy, and affordable financing for your equipment purchase