SpotSee8114-S MaxiLog Alert -80C Single-Use 8114-M MaxiLog Alert -80C Multi-Use in Dallas, TX, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Item numbers
- 7050-G2 MaxiLog PDF V3 Temperature Data Logger
- Memory
- 14K
- Temperature range
- -30°C to +70°C / -22°F to +158°F
- Recording type
- Single-Use(may be overwritten prior to starting unit), Multi-Use
- Temperature measurement range
- -80°C to +30°C /-113°F to +86°F
- Temperature accuracy range
- ±0.5°C at 0°C to 10°C,±2.0°C at extremes /±0.9°F at 32°F to 50°F,±3.6°F at extremes
- Temperature resolution
- 0.1°C / 1.8°F
- Data storage capacity
- 8Kdata points (8070)
- Battery life / type
- ER2450T,1 yr operatinglife, 3 yr shelf life
- Data sampling interval
- 2 seconds to 36 hours
- Start up delay
- 2 seconds to 36 hours
- Alarm programming
- Programmable high and low limits. Alarm triggered when limits are exceeded for specified time period.
- Alarm modes
- Exceed Limit,Continuous Interval, Cumulative
- Alarm reset options
- Single Use: No reset option Multi-Use: Alarm is reset when loggeris erased and reprogrammed
- Alarm notifications
- Red LED flashes when alarm has been triggered
- Indicators
- LED Indicators:on/recording (green), alarm (red flash)
- Start up options
- Push buttonautomatic start with optional delay
- Dimensions
- 8.8 cm (l) x 3.49 cm (w) x1.58 cm (h) / 3.5 in (l) x1.38 in (w) x 0.62 in (h)
- Weight
- 65 g / 3.0 oz
- Quality assurance certifications
- CE, NIST Traceable, Certificate of Calibration
- Minimum system requirements
- Windows XP, Vista: 7, 8 and 10
- Required software
- c\temp+ (read only) | MDAS-Pro, 21 CFR (user configurable)
- Computer interface
- USB A, built-in interface
- Category
- IT Infrastructure in USA
- Subcategory
- Data loggers
- Subcategory 2
- Condition monitors
- Subcategory 3
- Temperature data loggers
- Listing ID
- 108750961
Description
Light, efficient and accurate - MaxiLog PDF. 90-day USB temperature data logger.
MaxiLog PDF
A single-use, 90-day temperature data logger with USB connectivity and PDF reports. This logger is completely pre-programmed with a standard start delay of 30 minutes to allow the logger to adjust to the internal temperatures of the cargo being shipped - perfect for use in cold chain applications in the life science and food industries where refrigerated products require temperature validation. This unit is ideal to fit inside small packages, and automatically downloads the data to a graph summary upon plug in.
$16 USD