Tek-Ind Textile Range in Fidenza, Emilia-Romagna, Italy
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Printing unit
- from 1 to 12 printing units
- Print format
- 90x180 cm (others on customer request)
- Maximum fabric reel width
- 200 cm
- Three-pass ghibly oven
- This oven, with a total length of 6 m, allows you to triple the time the fabric remains in the oven. After the first pass, the fabric is sent back, thus making it possible to lower the drying temperature and still be able to dry the print sufficiently without ruining the fabric.
- Possible power supplies for the oven
- Gas, LPG, Diesel, Electric.
- Ext-01-nwf
- The line ends by rewinding the coil, special laser systems ensure that the coil is rewound straight.
- Total line width
- 320 cm
- Worktop height
- 91 cm
- Theoretical production
- 10-12 cycles/min
- Print ratio accuracy
- +/- 0.2 mm.
- Int-01-tx
- 3 Kw
- Ga-3 colors + 2 ir hoods 40x2
- 29 Kw
- Ext-01 tx
- 3 Kw
- Total
- 38 Kw + 90.000 Kcal
- Size introduction length
- 210 cm
- Size introduction width
- 265 cm
- Size introduction height
- 220 cm
- Max. roll width
- 200 cm
- Max. roll diameter
- 80 cm
- Max. roll weight
- 300 kg;
- Machine speed
- 25 m/min.
- Max. hourly production
- 1500 m
- Useful drying field
- 900 x 200 cm
- Width of teflon glass mats
- 200 cm
- Number of carpets
- 3
- Maximum allowable temperature
- 180°C
- Installed thermal power
- 200,000 Kcal.
- Installed electrical power
- 5 KW.
- Independent carpet speed
- from 1.3 to 6.3 m/min.
- Length
- 125 cm
- Width
- 265 cm
- Height
- 220 cm
- Category
- Dyeing & Finishing in Italy
- Subcategory
- Graphicssockstapesnon-woventextilesovenscomplementary equipment
- Listing ID
- 105160437
Description
Continuous screen printing line for fabrics, with a customizable number of printing units based on customer requests, the printing line is made up of:
- introductions for fabrics
- flat screen printing machine from 1 to 12 colors
- three-pass drying oven
– rewinder for fabrics
Unwinder for fabrics, possibility of managing one reel at a time, the fabric after being unwound is folded to remove any tension on the fabric to be printed.
The management of the unwinder speed is carried out via photocells that define the correct speed of fabric supply to the printing machine.
Drag group with adhesive belt, advancement with brushless motor: the speed of the machine is defined by the printing speed or by the advancement of the printing belt.
Printing units: from 1 to 12 printing units
Adjustment of stroke, pressure, inclination of the doctor blade and number of passes.