SKT Series Mainframe in Shanxi, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Working process
- Firstly, the high pressure wind enters the triplex by the high pressure air duct, then enters the solenoid valve (two five-way valve) after the triplex filtering and oil mist and regulation by the pressure relief valve; The solenoid valve under the control of PLC make the cylinder up and down intake alternately, which results in the up and down movement of the cylinder's piston, and then the cylinder drives the valve to make the low pressure air into and out of the air chamber to produce the pulsating water flow. Human Machine Interface can be used to adjust the jigger frequency, the intake and the rest time.
- 1. type
- SKT-6; SKT-8; SKT-10; SKT-12; SKT-14; SKT-20
- 2. feed size
- mm; 0-80; 0-80; 0-80; 0-80; 0-80; 0-80
- 3. processing capacity
- t/h; 6-120; 6-160; 6-200; 6-240; 6-280; 6-400
- 4. jigger area
- Fine Coal Part; m2; 2; 2.7; 3.4; 4; 4.67; 6.7
- 5. middlings part
- m2; 2; 2.7; 3.4; 4; 4.67; 6.7
- 6. gangue part
- m2; 2; 2.7; 3.4; 4; 4.67; 6.7
- 7. total
- m2; 6; 8; 10; 12; 14; 20
- 8. diameter of screen hole
- Fine Coal Part; mm; 15x18; 15x18; 15x18; 15x18; 15x18; 15x18
- 9. gangue part
- mm; 15x18; 15x18; 15x18; 15x18; 15x18; 15x18
- 10. middlings part
- mm; 12x15; 12x15; 12x15; 12x15; 12x15; 12x15
- 11. jig number
- c/min; 30-90; 30-90; 30-90; 30-90; 30-90; 30-90
- 12. supporting air blower
- Air volume; m3/min; 45; 55; 70; 85; 140; 140
- 13. air pressure
- Mpa; 0.035; 0.035; 0.035; 0.035; 0.035; 0.035
- 14. supporting air blower
- Air volume; m3/min; 3; 3; 3; 3; 3; 6
- 15. air pressure
- Mpa; 0.8; 0.8; 0.8; 0.8; 0.8; 0.8
- 16. type
- SKT-6; SKT-8; SKT-10; SKT-12; SKT-14; SKT-20
- 17. feed size
- mm; 0-80; 0-80; 0-80; 0-80; 0-80; 0-80
- 18. processing capacity
- t/h; 6-110; 6-150; 6-180; 6-220; 6-250; 6-360
- 19. jigger area
- Gangue part; m2; 2; 2.7; 3.4; 4; 4.8; 6.8
- 20. middlings part
- m2; 2; 2.7; 3.4; 4; 4.8; 6.8
- 21. total
- m2; 2; 2.7; 3.4; 4; 4.8; 6.8
- 22. diameter of screen hole
- Gangue part; mm; 15x18; 15x18; 15x18; 15x18; 15x18; 15x18
- 23. middlings part
- mm; 12x15; 12x15; 12x15; 12x15; 12x15; 12x15
- 24. jig number
- c/min; 30-90; 30-90; 30-90; 30-90; 30-90; 30-90
- 25. supporting air blower
- Air volume; m3/min; 45; 55; 70; 85; 140; 140
- 26. air pressure
- Mpa; 0.035; 0.035; 0.035; 0.035; 0.035; 0.035
- 27. supporting air blower
- Air volume; m3/min; 3; 3; 3; 3; 3; 6
- 28. air pressure
- Mpa; 0.8; 0.8; 0.8; 0.8; 0.8; 0.8
- Subcategory
- Mining equipment
- Listing ID
- 104632480
Description
Everyone knows that the quality of raw coal is now poor, and there are even fewer coal of a single coal type, so how can we wash coal well, wash more coal, and recover more coal? SKT is your best choice!
STK INTELLIGENT CNC JIGGER
►Everyone knows that the quality of raw coal is now poor, and there are even fewer coal of a single coal type, so how can we wash coal well, wash more coal, and recover more coal? SKT is your best choice!
►SKT series jigger is the world's advanced level of high-efficiency and energy-saving modern jigger, even with large processing amount; its separation effect is good, and it has formed the SKT4-SKT30 series; the processing capacity varies from 40T/h to 600T/h ; it is suitable for lump coal, slack coal, non-graded and graded joint coal washing and preparation, with simple process flow, less additional equipment, and low cost of coal preparation.