VNA100 Series Vector Network Analyzer VNA106/VNA108 in Beijing, China

Introduction:
The PicoVNA100 series is a brand new USB controlled professional and laboratory grade 300kHz to 8.5GHz vector network analyzer designed in the UK, with unparalleled performance and portability.
High performance, portability and low cost
The PicoVNA100 series is a brand new USB controlled professional and laboratory grade 300kHz to 8.5GHz vector network analyzer designed in the UK, with unparalleled performance and portability at an affordable price. Despite its small size and low price, the instrument is full-featured, has a low error rate, and has a "QuadRX" four receiver architecture. This can support 8 and 12 error calibrations at the same time without the uncorrectable switching errors, delays and unreliability of traditional three receiver designs. The instrument supports a variety of convenient calibration methods such as "enhanced isolation correction" and "unknown pass-through".
The Pico VNA100 has an excellent dynamic range of up to 118dB at 10Hz bandwidth (124dB for the VNA108), and a trace noise floor of only 0.005dBrms at its maximum bandwidth of 140kHz. It collects all four scattering parameters in just 190 microseconds at each frequency point; that is, a 500-point, 2-port S2P Touch stone file compatible with test, math, viewing, and EDA simulation tools can be generated in less than one-tenth of a second! This performance is more than four times the performance of other full-featured vector network analyzers at the same cost; in fact, the VNA106 is more cost-effective as a high dynamic range scalar network analyzer or single-port vector reflectometry. This breakthrough solution is very affordable and can be used not only in classrooms, small businesses, and even amateur studios, but also to meet the various needs of microwave laboratories and experts. The VNA106 also includes a Bias-T circuit to facilitate the application of bias or test stimulus.