GMC GML 1640 AT in Pomona, CA, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Stock number
- 7708
- Dimensions
- 80” x 38” x 57”
- Weight
- 3,230 LBS
- Swing
- 16.0 in
- Centers
- 40.0 in
- Spindle bore
- 2.06 in
- Power
- 5.0 hp
- Rpm
- 2000.0 rpm
- Swing over cross slide
- 9.5 in
- Max. swing over bed
- 16"
- Max. length of workpiece
- 40”
- Max. swing over cross slide
- 9-1/2”
- Max. swing in gap
- 21-3/4”
- Width of bed
- 10”
- Taper of spindle center
- M.T.# 6 ( with MT6/MT4 sleeve)
- Spindle speeds
- 50-2,000 rpm / 12steps
- Longitudinal feeds
- 0.0017-0.0242 IPR, 32 kinds
- Cross feeds
- 0.00056-0.008 IPR, 32 kinds
- Inch threads
- 56-4 TPI, 32 kinds
- Metric threads
- 0.4-7.0 mm , 32 kinds
- Module threads
- 0.4-7.0 mm, 32 kinds
- Diametral pitch threads
- 8-120 DP , 32 kinds
- Max. travel of top slide
- 3-9/16”
- Max. travel of cross slide
- 8”
- Spindle length w/o chuck
- 20”
- Leadscrew length x tpi
- 1-1/4” x 4 TPI
- Diameter of tailstock quill
- 2”
- Max. travel of tailstock quill
- 4-3/8”
- Main motor
- 5 HP, 220V/440V, 3 phase
- Amperage draw
- 20Amp on 220V, 12Amp on 440V
- Coolant pump motor
- 1/8 HP, 220V/440V, 3 phase
- Category
- Heavy Duty Lathes in USA
- Subcategory
- Lathes, engine
- Listing ID
- 103721498
Description
GMC GML 1640 AT lathe for sale, used condition. 16" swing, 40" centers, 2.06" spindle bore, 5 HP motor, speeds up to 2000 RPM. Robust design with 32 kinds of feeds and threads, perfect for precision work.
Machine Standard Features and Equipment:
· Made in Taiwan
· ISO 9001 certified
· Large spindle bore 2-3/16”
· Heavy Duty spindle D1-6
· High Tensile cast iron FC25
· Heavy Duty guideway width 10”
· Heavy Duty main motor 5HP
· 12 spindle speeds from 50-2,000 rpm
· 32 kinds of inch threads, and 32 kinds of metric threads
· Threading and feeding rate change without changing gears
· Spindle is balanced, hardened and precision ground
· Spindle is supported at 3-point by high precision bearings
· All gears and shafts are hardened and precision ground
· Guideways induction hardened and precision ground
· Automatic lubrication system in headstock and feed box
· One year industrial warranty for parts
Standard Equipment (free):
· Free CARMAR DRO installed