Automatic SMT Stencil Cleaning Machine QT-1000X in Shenzhen, Guangdong, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Cleaning area size:
- 750mm(L) ×750mm(W) × 40mm(H)
- Physical dimension:
- 1100mm(L) ×1650mm(W) × 1980mm(H)
- Nozzles in cleaning area:
- 40 nozzles, 304 stainless steel, fan-shaped 65°
- Nozzles in rinsing zone:
- 40 nozzles, 304 stainless steel, fan-shaped 65°
- Drying area:
- 4 air knives, 304 stainless steel
- Cleaning size range setting:
- 50—750mm
- Cleaning time:
- 0~100 minutes (adjustable)
- Rinsing time:
- 0~100 minutes (adjustable)
- Drying time:
- 0~100 minutes (adjustable)
- Power/air source:
- Three-phase five-wire system, 380V/18Kw (rated power)/0.45Mpa-0.7Mpa
- Weight:
- 590KG
- Cleaning area size
- 750mm(L) ×750mm(W) × 40mm(H)
- Cleaning size range setting
- 50—750mm
- Cleaning time
- 0~100 minutes (adjustable)
- Nozzles in rinsing zone
- 40 nozzles, 304 stainless steel, fan-shaped 65°
- 2. visualization of the whole process
- Visualization window and LED light device make the cleaning process clear at a glance.
- 3. scientific nozzle design (patent)
- 8 spray arms on the left and right are distributed-completely solve the blind area of cleaning, the spray arms and nozzles are detachable.
- The visual nozzle pressure can be adjusted
- it solves the collision and splashing problems of small workpiece sizes under high-pressure spray conditions during cleaning.
- 6. comprehensive cleaning system
- the standard diluent tank\rinsing tank heating system improves the cleaning efficiency. Shortens the cleaning time and is compatible with running water washing
- 8. the quality of the fuselage
- the overall 304 stainless steel fuselage, resistant to acid, alkaline, and other cleaning fluids.
- 10. lower operating cost
- lower equipment investment cost, localized service, team, and sufficient spare parts supply.
- Application
- SMT stencil, copper mesh, glue mesh, glue printing jigs, and PCB misprint cleaning, which can effectively clean the residual solder paste, red glue and other contaminants on the surface after printing and the hole wall.
- Subcategory
- Smt cleaning machine
- Subcategory 2
- Smt peripheral equipment
- Listing ID
- 103131204
Description
▶The cleaning tank, the original tank, and the spray tank are designed with a liquid level sensor overflow alarm.
▶The opening of the front door is designed with photoelectric sensor protection. When the equipment is cleaning, if the front door is not closed, the cleaning will stop to prevent liquid or water from spraying out.
▶The air source, DI water inlet, and heating system all have PLC monitoring and alarm systems, and double protection is designed to ensure that any failure will not damage the equipment.
▶The main parts are imported parts and well-known brands in the industry, such as pumps from Ingersoll Rand, CKD solenoid valves, Panasonic PLC, German rails.
▶The operating mechanism adopts the cleaning object to be thrown up and down on the screen, imported guide rail + stepping drive, and the spray arm and air knife are fixed.
What is stencil cleaning machine in the SMT process?