1746-NI4 | SLC 4 Point Analog Input Module in Fujian, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Dimensions
- 24.5 cm x 16.5 cm x 5.5 cm
- Weight
- 0.3 kg
- Mfr. part number
- 1746-NI4
- Part number/catalog no.
- 1746-NI4
- Series
- SLC 500
- Module type
- Analog I/O Module
- Backplane current (5 volts)
- 25 milliamps
- Backplane current (24 volts dc)
- 85 milliamps
- Input signal category
- -20 to +20 mA (or) -10 to +10V dc
- Bandwidth
- 10 Hertz
- Current input coding
- -16,384 to +16,384
- Update time
- 512 microseconds
- Voltage input coding
- -32,768 to +32,767
- Resolution
- 16 bits
- Chassis location
- Any I/O module slot except slot 0
- Step response
- 60 milliseconds
- Backplane current
- (5 Volts) 35 mA;(24 Volts DC) 85 mA
- Applications
- Combination 120 Volts AC I/O
- Conversion type
- Delta–Sigma Modulation
- Cable lengths
- 0.5, 1, 2.5, or 5.0 meters.
- Converter resolution
- 16 bit
- Upc
- 1.06621E+13
- Repeatability
- ±1 LSB
- Non–linearity
- 0.0001
- Unspsc
- 32151705
- Category
- Input/Output Modules in China
- Subcategory
- Plc
- Subcategory 2
- Control system components
- Listing ID
- 101742839
Description
1746-NI4 SLC 4 Point Analog Input Module
1746-NI4 SLC 500 High Resolution Analog Input Module 4 Point
1746-NI4 SLC 500 High Resolution Analog Input Module, 4 Point. Number of Inputs: 4 Analog Inputs ±10V DC or ±20 mA; Current Loop Input Range ±20 mA (nominal), ±30 mA (maximum)
The 1746-NI4 is an SLC 500 Four (4) Channel Analog Input Module. It has user-selectable analog channels for voltage or current to support multiple monitoring and control applications; it has a 16-bit resolution and contains a removable terminal block that provides connections analog input channel. This channel can be connected as a differential input. There is a DIP that switches on the circuit board to select the input or current voltage. The Backplane current at 5 Volts of this module is 25 mA; at 24 Volts, the current is 85 mA. Caution should be given to avoid connecting the voltage source without the transmitter current, etc. to the channel configured for current input.