1746SC-NO8I | Analog output module in Fujian, China
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Dimensions
- 3.2 cm x 14.6 cm x 13.3 cm
- Weight
- 0.2 kg
- Mfr. part number
- 1746SC-NO8I
- Series
- SLC
- Part number
- 1746SC-NO8I
- Part number/catalog no.
- 1746sc-NO8I
- Product type
- Analog current output module
- Module type
- Analog output module
- Compatibility
- SLC 500
- No. of output
- Eight (8)
- Cable
- Belden 8761
- Output signals
- 0-20 mA; 4-20 mA
- Terminal screw torque
- 7 lb-in to 9 lb-in
- Module resolution
- 16-bit
- Wire size
- Maximum 14 AWG
- Slot width
- 1-slot
- Mounting location
- any slot of 1746 chassis except slot
- Backplane current consumption
- 120mA at 5 VDC and 240 mA at 24 VDC
- Recommended cable
- Belden 8761 (shielded, twisted-pair) or equivalent
- Operating temperature
- 0°C to +60°C (+32°F to +140°F)
- Storage temperature
- -40°C to +85°C (-40°F to +185°F)
- Operating humidity
- 5 to 95% non-condensing
- Category
- Input/Output Modules in China
- Subcategory
- Plc
- Subcategory 2
- Control system components
- Listing ID
- 101734059
Description
1746SC-NO8I Analog output module
1746SC-NO8I Analog output module This module has Eight (8) analog output channels that generate 0-20 mA / 4-20 mA output signals with a module resolution of 16 bits. This module occupies a single slot and is compatible for use with the SLC 500 platform.
The 1746sc-NO8I is an analog output module from Spectrum controls, an encompass partner company of . This module has Eight (8) analog output channels that generate 0-20 mA / 4-20 mA output signals with a module resolution of 16 bits. This module occupies a single slot and is compatible for use with the SLC 500 platform. The Spectrum Controls 1746SC-NO8I analog current output module is made for use with SLC 500 controller systems. No less than 8 different analog current outputs are available on the 1746SC-NO8I output module so that it can connect to other devices. A grounded object should be touched before handling the 1746SC-NO8I module to protect it against electrostatic charge.