2024 KOMATSU HM300-5 in Denver, CO, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Type
- Articulated type, box-sectioned construction on front and rear Connected by strong torque tubes.
- Aspiration
- Turbo-charged | after-cooled | cooled EGR
- Number of cylinders
- 6
- Bore
- 4.92" (125 mm)
- Stroke
- 5.91" (150 mm)
- Piston displacement
- 671 in³ (11.0 ltr)
- Sae j1995 hp
- 332 HP (248 kW)
- Iso 9249 /sae j1349
- 324 HP (242 kW)
- Rated rpm
- 2,000 rpm
- Fan drive type
- Hydraulic Driven
- Maximum torque
- 1,237 ft lbs (171 kg•m)
- Fuel system
- Direct Injection
- Governor
- Electronically controlled
- Lubrication system: method
- Gear pump | force-lubrication
- Filter
- Full-flow type
- Air cleaner
- Dry type with double elements and precleaner | plus dust indicator
- Torque converter
- 3-elements | 1-stage | 2-phase
- Transmission
- Full-automatic | counter-shaft type
- Speed range
- 6 speeds forward and 2 reverse
- Lockup clutch
- Wet | single-disc clutch
- Reverse
- Torque converter drive and direct drive in all gear
- Shift control
- Electronic shift control with automatic clutch modulation in all gear
- Maximum travel speed
- 36.4 mph (58.6 km/h)
- Final drive type
- Planetary gear
- Differential ratio
- 3.154
- Planetary ratio
- 4.667
- Front
- Hydro-pneumatic suspension
- Rear
- Combined hydro-pneumatic and rubber suspension system
- Supplementary steering
- Automatically actuated | electrically powered
- Standard
- ISO3450
- Minimum turning radius, wall to wall
- 26'7" (8.10 m)
- Forward
- Torque converter drive in 1st gear | direct drive in 1st lockup and all higher gears
- Service brakes
- Full-hydraulic control, oil-cooled multiple-disc type on front and center axles
- Parking brake
- Spring applied, caliper disc type
- Retarder
- Front and center axle brakes act as retarder
- Articulation angle
- 45° each direction
- Capacity: struck
- 17.5 yd³ (13.4 m3)
- Payload
- 30.9 U.S. tons (28.0 metric tons)
- Heaped (2:1, sae)
- 22.4 yd³ (17.1 m3)
- Material (high-tensile-strength steel)
- 184,925 psi (130 kg/mm2)
- Material thickness: sides
- 0.47" (12 mm)
- Material thickness: bottom
- 0.55" (14 mm)
- Material thickness: front
- 0.31" (8 mm)
- Target area (inside length x width)
- 17'3" x 8'10" (5250 mm x 2685 mm)
- Heating
- Exhaust heating (optional)
- Hoist cylinder
- Twin | telescopic type
- Hoist time
- 10.5 sec
- Relief pressure
- 4264 psi (300 kg/cm² / 29.4 Mpa)
- Gross vehicle weight
- 117,892 lbs (53,475 kg)
- Weight distribution: empty
- Front 58.9% | Center 22.5% | Rear 18.6%
- Weight distribution: loaded
- Front 30.8% | Center 36.0% | Rear 33.2%
- Standard tire
- 23.5 R25
- Fuel tank
- 102.5 U.S. gal (388 ltr)
- Def tank
- 8.7 U.S. gal (32.8 ltr)
- Empty weight
- 55,986 lbs (25,395 kg)
- Engine oil
- 9.2 U.S. gal (35 ltr)
- Hydraulic system
- 27.2 U.S. gal (103 ltr)
- Suspension (total)
- 2.7 U.S. gal (10.4 ltr)
- Differential (total)
- 18.9 U.S. gal (71.5 ltr)
- Final drives (total)
- 6.1 U.S. gal (23 ltr)
- Torque converter, transmission and retarder cooling
- 21.1 U.S gal (80 ltr)
- Subcategory
- Komatsu
- Subcategory 2
- Off-highway trucks
- Listing ID
- 100208089
Description
HM300-5 ARTICULATED HAUL TRUCK
When it comes to maximizing your productivity, the HM300-5 delivers maneuverability, comfort and durability in one — even in harsh conditions. Automated powertrain features allow consistent cycle times from all operator experience levels.
DURABILITY AND PERFORMANCE IN ONE
• Excellent maneuverability
• Automated powertrain features
• Designed for durability
FEATURES & BENEFITS
KOMATSU TRACTION CONTROL SYSTEM
Monitor and adjust to changing conditions. Komatsu Traction Control System (KTCS) is designed to provide excellent machine performance in soft and slippery ground conditions without sacrificing steering performance.
MAXIMIZE TRANSMISSION LIFE
Powerful acceleration, smooth down shifting and synchronized engine speed. The K-ATOMiCS transmission features a six-speed, fully automatic transmission with an advanced electronic system to reduce shift shock and torque cutoff for exceptional efficiency.
GREATER CONFIDENCE WHEN TRAVELING DOWNHILL
Increase operator confidence when traveling downhill through large capacity, continuously cooled, wet multiple-disk brakes that also function as a highly responsive retarder with 526 horsepower absorption capacity.
SMOOTH RIDE OVER ROUGH TERRAIN
Discover a smooth ride over the rough terrain with front and rear axle hydro-pneumatic suspensions. The rear axles are mounted on a dynamic equalizer structure and the entire system is designed to help reduce operator fatigue while offering a comfortable ride.
COMFORTABLE OPERATOR ENVIRONMENT
Improved cab entry in front of the front axle. A curved front dash panel. Thoughtful design enhancements throughout the cab provide the operator excellent visibility and a large, quiet environment to promote productivity and comfort.
EFFICIENT LOADING
Monitor production with a standard, integrated payload meter that displays loaded material weight on the LCD monitor inside the cab. External lamps illuminate green, yellow or red as the payload increases to help prevent under and over loaded haul cycles.
STANDARD EQUIPMENT
• Air cleaner, dry type, double elements
• Air cleaner dust level indicator
• Air pre-cleaner
• Alternator, 90 A, 24 V
• Alarm, backup
• Anti-slip material on fenders
• Auxiliary steering system, automatic, electric
• Back-up lamp
• Batteries, 2 x 12 V/200 Ah
• Battery disconnect
• Centralized greasing
• Color rear view camera and monitor
• Coolant temperature alarm and lamp
• Dump counter
• ECO Guidance
• Electronic hoist control system
• Electric circuit breaker, 24 V
• Electric priming fuel pump
• Electronic pump for hydraulic tilt cab
• Engine, Komatsu SAA6D125E-7
• Engine underguard
• Engine shutdown secondary switch
• Front view mirror
• Full-automatic F6-R2 transmission with lock-up torque converter & K-ATOMiC shift control
• Hazard lamps
• Hand rails for platform and ladder
• Headlights, front (high and low)
• Heated rearview mirrors, LH and RH side
• Horn, electric
• Hydraulic driven cooling fan, for after cooler
• Hydraulic driven cooling fan, for radiator
• Hydropneumatic suspension, front and rear
• Interaxle lockup, wet disc clutch type, controlled by KTCS
• Komatsu Traction Control System (KTCS)
• Komatsu Diesel Particulate Filter (KDPF)
• Komatsu Variable Geometry Turbocharger (KVGT)
• KOMTRAX®
• Ladders LH side
• Mud guards
• Parking brake
• Payload Meter (PLM)
• Protective grille for rear window
• Propeller shaft guards, front and rear
• Provision for tailgate
• Retarder/brake system
• Rims for 23.5 x 25, set of 6
• ROPS/FOPS cab Level 2
-2 x DC12V electrical outlets
-12V cigarette lighter
-Air conditioner/Heater/Defroster
-Ashtray
-Color LCD/TFT multi-monitor
-Cup holder
-Floor mat
-Operator seat, reclining, air suspension type with 3-point retractable seat belt, 3" width lap belt, 2" width shoulder belt
-Passenger seat with 2-point retractable seat belt, 3" width
-Power window (LH)
-Space for lunch box
-Sliding window (RH)
-Steering wheel, tilt and telescopic
-Sun visor, front window
-Tiltable ROPS cab with FOPS, sound suppression type
-Windshield washer and wiper, front and rear
• Selective Catalytic Reduction (SCR) system
• Starting motor, 7.5 kW
• Steering joint locking assembly
• Step (right side)
• Stop, tail, and turn signal lamps (LED)
• Tool box
• Transmission underguard
• Two mode engine power system (Economy and Power)
• Work lamps, LH and RH side
OPTIONAL
• 23.5 x 25 tires
• 750/65 R25 rims
• 750/65 R25 tires
• Body, 22.4 yd3
• Body, exhaust heated, 22.4 yd3
• Tail gate, scissors type
Similar models may be shown in addition to the featured model. Equipment may be shown with options. Specifications are subject to change without prior notice.