2024 KOMATSU D85PXI-18 in Denver, CO, USA
New
Doubleclick to zoom in
Contact the seller for
additional photos and information.
Specifications
- Condition
- new
- Type
- 4-cycle, water-cooled, direct injection
- Aspiration
- Komatsu variable geometry turbocharged, air-to-air aftercooled
- No. of cylinders
- 6
- Bore x stroke
- 125 mm x 150 mm (4.49" x 5.69")
- Piston displacement
- 11.04 ltr (674 in³)
- Governor
- All-speed and mid-range, electronic
- Horsepower: sae j1995 / gross
- 199 kW (267 HP)
- Horsepower: iso 9249 / sae j1349* / net
- 197 kW (264 HP)
- Rated rpm
- 1900 rpm
- Fan drive type
- Hydraulic
- Lubrication method
- Gear pump, force lubrication
- Lubrication filter
- Full-flow
- Travel speed: 1st (forward)
- 3.3 km/h (2.1 mph)
- Travel speed: 1st (reverse)
- 4.4 km/h (2.7 mph)
- Travel speed: 2nd (forward)
- 6.1 km/h (3.8 mph)
- Travel speed: 2nd (reverse)
- 8.0 km/h (5.0 mph)
- Travel speed: 3rd l (forward)
- 7.8 km/h (4.8 mph)
- Travel speed: 3rd l (reverse)
- 9.2 km/h (5.7 mph )
- Travel speed: 3rd (forward)
- 10.1 km/h (6.3 mph)
- Travel speed: 3rd (reverse)
- 13.0 km/h (8.1 mph)
- Pccs
- Palm Command Control System (PCCS) lever controls for all directional movements. Pushing the PCCS lever forward results in forward machine travel, while pulling it rearward reverses the machine. Simply tilt the PCCS lever to left to make a left turn. Tilt it to the right for a right turn.
- Hss
- Hydrostatic Steering System (HSS) is powered by steering planetary units and an independent hydraulic pump and motor. Counterrotation turns are also available. Wet, multiple-disc, pedal-controlled service brakes are spring-actuated and hydraulically released. Gear shift lock lever also applies parking brake.
- Minimum turning radius
- 2.2 m (7'3")
- Suspension
- Oscillating equalizer bar and pivot shaft
- Track roller frame
- Monocoque, large section, durable construction
- Rollers and idlers
- Lubricated
- Track shoes
- Lubricated tracks. Unique seals prevent entry of foreign abrasive material into pin to bushing clearances to provide extended service life. Track tension is easily adjusted with grease gun.
- Number of track rollers (each side)
- 8
- Type of shoes (standard)
- Single grouser
- Number of shoes (each side)
- 45
- Grouser height
- 72 mm (2.8")
- Shoe width (standard)
- 910 mm (36")
- Ground contact area
- 63,340 cm² (9,820 in²)
- Ground pressure (with dozer, cab and rops)
- 0.40 kg/cm² / 39.8 kPa (5.77 psi)
- Track gauge
- 2250 mm (7'5")
- Length of track on ground
- 3480 mm (11'5")
- Tractor weight: including rops cab, rated capacity of lubricant, hydraulic control unit, coolant, full fuel tank, operator, and standard equipment.
- 26,210 kg (57,849 lb)
- Operating weight: including sigmadozer® and fixed multi-shank ripper (ex) or straight tilt dozer and long drawbar (px) rops cab, operator, standard equipment, rated capacity of lubricant, hydraulic control unit, coolant, and full fuel tank.
- 29,520 kg (65,080 lb)
- Hydraulic control units
- Closed-center load sensing system (CLSS) designed for precise and responsive control, and for efficient simultaneous operation. All spool valves externally mounted beside the hydraulic tank. Piston type hydraulic pump with capacity (discharge flow) of 331 L/min (87.4 US gpm) at rated engine rpm.
- Relief valve setting
- 22.6 MPa (3,270 psi)
- Spool control valves for sigmadozer®, semi-u tilt or straight tilt dozer: blade lift
- Raise, hold, lower, and float
- Spool control valves for sigmadozer®, semi-u tilt or straight tilt dozer: blade tilt
- Right, hold, and left
- Spool control valves for sigmadozer®, semi-u tilt or straight tilt dozer: rear attachment
- Raise, hold, and lower
- Fuel tank
- 470 ltr (124.1 U.S. gal)
- Def tank
- 23.5 ltr (6.2 U.S. gal)
- Coolant
- 65 ltr (17.2 U.S. gal)
- Engine
- 38 ltr (10.0 U.S. gal)
- Damper case
- 1.6 ltr (0.42 U.S. gal)
- Torque converter, transmission, bevel gear, and steering system
- 60 ltr (15.8 U.S. gal)
- Final drive (each side)
- 36 ltr (9.5 U.S. gal)
- Subcategory
- Dozers
- Subcategory 2
- Crawler
- Listing ID
- 100208067
Description
KOMATSU — LARGE DOZER — D85PXi-18
Need a powerful, economical dozer with outstanding floatation? You’ll appreciate the D85PXi-18’s 11-liter engine, 14’ 4” straight tilt blade, fuel-efficient automatic transmission and expansive footprint for soft ground conditions. Optional extended wear life undercarriage with 36” wide PLUS (Parallel Link Undercarriage System) rotating bushing track shoes is available.
FEATURES
CLOSE THE OPERATOR SKILL GAP
Machine logic allows the dozer to continuously learn the terrain and make calculated decisions for the next pass. Intelligent Machine Control helps lessen the skill gap between new and experienced operators.
ADVANCED MACHINE CONTROL
In select situations — auto stripping, rough dozing, spreading, advanced finish grading — operators can opt for nearly 100% machine control auto usage. They can even apply automatic control without having a 3D model.
A MACHINE THAT LEARNS FROM THE OPERATOR
Automatic functions give the dozer the ability to learn from operator's blade input, resulting in more adaptability, easier operation and less reliance on operator input.
OUTSTANDING BLADE RESPONSE FOR FINISH GRADING
To deliver unparalleled grading performance, iMC enables the dozer to look ahead at grade transitions and alter the blade angle accordingly.
STANDARD EQUIPMENT
• Air cleaner, double element with dust indicator
• Alternator, 90 ampere/24V
• Auto idle shutdown function
• Backup alarm
• Batteries, 200 Ah/2 x 12V
• Battery disconnect switch
• Blade lift cylinders
• Color monitor, LCD
• Decelerator pedal
• Engine hood
• Engine intake centrifugal precleaner
• Engine, gull-wing side covers
• Exhaust pipe with raincap
• Fenders
• Front pull hook
• High mount foot rests
• Horn, warning
• Hydraulic driven radiator cooling fan with reverse clean mode
• Hydraulics for front attachment
--Single tilt, power pitch (EX SIGMADOZER only)
--Single tilt, manual pitch (non-SIGMADOZER)
• KOMTRAX® Level 5
• Komatsu Diesel Particulate Filter (KDPF)
• Komatsu Variable Geometry Turbocharger (KVGT)
• Locks, filler caps and covers
• Oil pressure check ports for power train
• Operator ID function
• PM service connector
• Radiator mask, heavy-duty, hinged, perorated
• Radiator reserve tank
• Rear cover
• ROPS cab**
o 75 dB operator ear noise level
o Air conditioner
o Cab accessories
--12V power supply (2 ports)
--Cup holder
--Rearview mirror
--Rear view monitoring (1 camera)
--AM/FM Radio w/remote AUX plug (3.5 mm)
o Work lights
--2 front, hood mounted
--2 front, cab mounted
--1 rear, left fender mounted
--2 rear, cab mounted
--1 ripper point (EX only)
• Seat, air suspension, fabric, heated low back, rotates 12.5° to right, headrest
• Seat belt, 3", retractable
• eat belt indicator
• Sealed electrical connectors
• Starting motor, 11.0 kW/24V
• Steering system: Hydrostatic Steering System (HSS)
• Torque converter
• Track roller guards, center and end sections
• Track shoe assembly
Heavy Duty rotary bushing (PLUS) track
- 36” PLUS Extreme Service shoe (PXi)
• Transmission with auto/manual shift modes
• Underguards, heavy duty
• Hinged belly pan
• Transmission
• Water separator
• Wide core cooling package
OPTIONAL EQUIPMENT
• Drawbar, rigid type
• Straight tilt (PXi)
Specifications are subject to change without prior notice. Similar models may be shown in addition to the featured model. Equipment may be shown with options.