Used Shrink Wrapping Machines in Spain

Labeler for small bottles

Labeler for small cans, constructed entirely of stainless steel. It features a handwheel for adjusting the height of the can label. Protected by a safety cabinet in compliance with EEC regulations.

2015 POSIMAT container elevator

The containers are received in the elevator's hopper. The containers are lifted by the elevator's belt paddles. The distance between the paddles and the dimensions of the containers allow for sorting: those not i...

ITGS-120A continuous induction sealer

Continuous induction sealer for installation on a packaging line. This machine operates on a conveyor belt that moves the containers under the sealing head, where the caps are heated and the induction seal is per...

Complete line for SERAC solids in stainless steel up to 5 kg

Complete line of solids for all types of powders, granules, etc. This machine's dosing system consists of electronic dosing, which is carried out based on the mode selected via the programming console, along the ...

TECDAKI sleever line with GRAHAM steam tunnel

• Manufacturer: Graham

The Sleevtec300 shrink sleeve machine applies up to 300 sleeves per minute, for a minimum length of 20 mm. These sleeves can be used as warranty seals or decorative labels for bottles, cans, and various container...

2010 Sleever Dispenser Turpins Packaging Systems LTD

Features Measurements: Voltage: 220/240V | Amps: 10 A | Air pressure: 5.5 BAR | Width: 1350 mm | High: 2300 mm | Length: 3800

2000 Tarnos linear multihead weigher.

Tarnos linear multihead weigher, designed for all types of products. A solution for mixing up to four different products. It features 24 Tarnos vibrators for four product outputs.

2007 SynchroPACK Stainless Steel Flowpack Wrapper

The SynchroPACK Electronic Flow Wrapper offers regular products, low- and medium-production runs, with manual, semi-automatic, or automatic feeds and multiple format changeovers. A cantilever design, modular cons...

GBM vacuum bell

GBM vacuum bell built in a/stainless steel with Busch vacuum pump of 63 m3 capacity. Welding bar 55 cm long.

Flowpack in stainless steel completely made by TALLERES MAYMA

Flow pack machines get their name from the way the product is packaged: the machine creates a plastic tube from a flexible film, and the product passes through it until it reaches a clamp that marks the beginning...

HERMA Adhesive Labeler

• Manufacturer: Herma

HERMA 2-head adhesive labeling machine

Flowpack IMANPACK tape with top reel

• Manufacturer: Imanpack

Horizontal packaging machine suitable for packaging solid products with polypropylene, polyethylene, or laminated films. Product range: Length: 80 to 600 mm Width: 40 to 180 mm Height: up to 100 mm Speed: Up to 4...

Coalza R95-DH vertical filler with encoder

• Manufacturer: Coalza

Bag packaging machine with coder installed in 2019. Starting with a single reel and a single dispenser, two twin packaging lines are generated, allowing two packages to be formed with each batch. More than 90 bag...

2000 Revinsa gravity monoblock for liquids

This 12-valve monoblock is the ideal solution for gravity-fed filling of still and alcoholic wines, semi-viscous spirits using a slight pressure, and viscous liquids using a vacuum. The tank (bell) is entirely co...

2001 Gravity Monoblock for Liquids

This 8-valve, 1,200 bph monoblock is the ideal solution for gravity-fed filling of still and alcoholic wines, semi-viscous spirits using a slight pressure drop, and viscous liquids using a vacuum. The tank (bell)...