Used Processing in Wallonia, Belgium

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

Furansand mixing plant FRANK

700 rpm Mixer installed in a framework with 2 mobil bunkers, each 1,5 m³ useful content To pose with the lift truck With 2 pumps, resin injection and cat, 2 speeds, mixing screw Ø 130 mm, between entry and exit 8...

Shake-out conveyer ULRICH 4000 mm x 1200 mm

Driven by cardan joint With elastic elements Needs 2 motors of ± 10 - 11 KW On 20 springs,

Rotary table shot blast plant SISSON-LEHMANN, Ø 1800 mm

Type: CADETTE, Serial number: 163 In good condition With filter SISSON-LEHMANN, Type 8PE, 2 hp, 220/380 V, 1420 rpm

Furnace loading conveyor UHDE

Motor UHDE type SM20/4, 1,1 kW, 220 V, 1410 rpm Loading bunker upside 1600 mm x 1500 mm, h.1400 mm Rotation on ball bearing supported ring

Greensand mixer capacity 5-6 t /h, SPEEDMULLOR 30A

Motor NORMACEM 13,2 kW, 220/380 V, 960 rpm Direct drive without gearbox, 2 horizontal grinding wheels With switch cabinet, pneumatic cover for sand filling, idem separated for the additives

Grinding tool GREIF, Ø 50 0mm, 60 m/s, cone pulley

• Manufacturer: Greif

7,5 kW, 220/380V Grinding stone: Ø 500mm x 127mm, width 50 mm

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

1993 Vibrating conveyor, 5700 mm x 900 mm x 220 mm

• Manufacturer: Jöst

Motor JÖST, type JV 176-550, 1,6 kW , 400 V, 3,75 A With two vibrating engines, with cover sheet, Ø entry 63 mm

Shake-out conveyer CHAUVIN, 3300 mm x 600 mm

• Manufacturer: Chauvin Arnoux

Type: Bi-Rol18TBZ, Serial number: 55149 External dimensions: 3400 mm  x 1080 mm, h. 1500 mm | Useful dimensions: 3300 mm  x 600 mm | Motor: 7,5 kW, 1500 rpm

Vibrating chut, 4590 mm x 600 mm x 360 mm

2 vibrating motors ITALVIBRAS, type : MASI 15/1600, serial number: 68867, 1,5 kW, 220/380 V, 50 Hz With 4 silent blocs, motors on the side Input height 360mm, output height 360mm With framed in the form of I and ...

Treatment ladle, 6,5-7 t, COLLIN

With teapot spout, 260 mm long With oilbath gearbox This treatment ladle was used for desulfurization

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s

Double floor type grinder DÜRRSCHMIDT/VITEX, 760 mm, 50m/s

Motor CEM, Type: MJPP180MN4, serial number: L617626, 22 kW, 220/380 V, 1450 rpm Driving by beltsstone max 760 mm, stone width 60 mm Speed 50/s Files plates 260x90 mm (2x) With control cabinet