Used Processing in New Jersey, USA

Centrifuge-Disc Bowl 2.2 kW (3 HP) - IPP# 94979

• Manufacturer: Westfalia

Designed for 5 gpm coolant flow rate, 7 gpm for oil. Batch system includes (1) 250 gal dirty coolant tank; (1) 250 gal clean coolant tank; (1) 250 gal dirty oil tank. Clean oil designed to discharge to barrels. S...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221213

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

Centrifuge-Disc Bowl 1.5 kW (2 HP) Stainless Steel 316 - IPP# 99783

• Manufacturer: Alfa Laval

laboratory separator disc centrifuge. Speed 3500 - 10000 rpm Throughput 200-600 ltr/hr Openings: liquid/solids outlet 3-1"; feed (process) 1-1/2"; operating liquid 3-1/2"

IPP# 601610, Methanol Plant-275 TPD (82,500 TPY) Petrochemical

Current Capacity: 82,500 TPY Product Quality: Methanol A Technology: Process uses natural gas as feedstock with added of carbon dioxide in the reforming furnace

IPP# 602139, Urea Prill Fertilizer and Agrochemical

Chemico Design – Conventional 1000 STPD Nameplate CO2 Compression – Centrifugal followed by reciprocating Urea Reactor – Unocal/Stamicarbon conventional design (1992) Urea Concentration – Crystallization, Crystal...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221284

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221281

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange Requires 2....

Pump-Vacuum - IPP# 208379

• Manufacturer: Wiegand

Steam injection 4 effects with ceramic pistons and VICARB Carbon Block Heat Exchanger, Serial Number 1296, rated -1/3 bar @ 150 degrees C Service Side, volume 16 liter; -1/3 bar @ 150 degrees C process side, volu...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221211

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac Motor

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221216

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact, and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by a...

Reactor Body, Kettle Batch-Type Stainless Steel 316 - IPP# 210499

• Manufacturer: Hamilton Kettle

sanitary reactor body, Wall thickness: 0.25" thick side wall, 0.220" thick top head, 0.218" thick bottom head Sanitary construction, vessel and jacket are insulated and covered with a SS shroud. Previously used f...

Classifier 762 mm (30 in) Stainless Steel 304 - IPP# 207942

• Manufacturer: Sweco

lined Turbo-Screen Classifier For scalping or dedusting on screens as fine as 20 microns Suction feed through 6" inlet Undersize particles are passed through the screen then are precipitated from the conveying ai...

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246701

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Stainless Steel 304 Centrifuge-Disc Bowl - IPP# 238437

• Manufacturer: GEA

continuous disc bowl centrifuge Rated 1 bar @ 50 deg C Sanitary construction for food processing Max feed temp 95 deg C Solids density: 1.42 kg/dm3, Heavy liquid density: 1.20 kg/dm3.Max feed temp 95 deg C. Motor...