Used Processing in Louisiana, USA

2012 Trane RTAC155

• Manufacturer: Trane

Equipment condition: In the rebuilding process | Voltage and phase: 460 Volt 3 Phase | Compressor type: Screw | Condenser type: Standard with low ambient | Refrigerant type: R-134

Derrick DE-1000 FHD Centrifuge

• Manufacturer: Derrick

www.VIDAEQ.com 🔥 Derrick DE 1000 FHD Decanter Centrifuge This package was refurbished in October 2023. It has been lightly used since then 👉 Viewing this on Machinio? Then follow this link to view the full Equ...

500 Gal Perry Receiver, 304 S/S, 75/75#

• Manufacturer: Perry Products

500 Gal Perry Receiver, 304 S/S, 75/75# Used 500 gallon Perry Products receiver, 304 stainless steel construction, approximately 48" diameter x 60" straight side, dished top and bottom, rated 75 PSI and full vacu...

Trinco 24 BP Blast Cabinet

• Manufacturer: Trinco
• Model: 24 BP

Trinco Blast Cabinet with BP Dust Collector Heavy-duty 14-gauge steel cabinet with carbon screen floor, tungsten carbide nozzle, enclosed foot valve blasting control, rubber gloves, and large 19.5” x 12” safety ...

Trinco 36 BP Blast Cabinet

• Manufacturer: Trinco
• Model: 36 BP

Trinco Dry Blast Cabinet with Dust Collector Heavy-duty 14-gauge steel cabinet designed for cleaning, deburring, finishing, etching, and more. Features tungsten carbide nozzle, enclosed foot valve blasting contr...

Goff 1244 Spinner Hanger

• Manufacturer: Goff
• Model: 1244

Goff Spinner Hanger Shot Blasting Machine, Year 2011, Model 3672-D, with Dust Collector (if desired). Previous owner reported that it was taken out of operation in working condition. Have cleaned out media. Seve...

Trinco 36x36/PC Pressure Blast

• Manufacturer: Trinco
• Model: 36x36/PC Pressure Blast

Trinco™ 36x36/PC Pressure Blast Cabinet with Model 800 PT Dust Collector Features a 36” x 36” x 36” work area, dual side doors, pneumatic vibrator, heavy-duty mixing valve, ¾” pressure regulator with moisture fi...

Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine

• Manufacturer: Siapi

Siapi Model EASP20.200 PET Two Step Stretch Blow Molding Machine Year- 2005 Number of mold cavities- 2 (can go up to 4) Neck finish- Currently set up for 43 mm Bottles per minute- 30 Currently processing 1-gallon...

2004 Thermal Care (30) ton Water Cooled Chiller

• Manufacturer: Thermal Care

2004 Thermal Care (30) ton Water Cooled Chiller Type- Water cooled Capacity- 30 ton Compressor- (2) 15 horse power Process pump (1) 10 horse power Year- 2004 Condition- very good

Thermal Care Model LQ2W3004 30 Ton Chiller

• Manufacturer: Thermal Care

Thermal Care Model LQ2W3004 30 Ton Chiller Type- Water cooled Serial number- 01721010306 Capacity- 30 Ton Compressor – (2) 15 horse power Process pump- (1) 10 horse power Refrigerant- R-22 Voltage- 460/3/60 Year-...

Cumberland Model 24B GRAN 3KN (50) Horse Power Granulator

• Manufacturer: Cumberland

Cumberland Model 24B GRAN 3KN (50) Horse Power Granulator Horsepower- 50 Cutting chamber- 15″ x 24″ Cutting Circle- 14″ Feed throat opening- 18″ x 24.” Rotor knives- 3, high sheer Bed Knives- 2 Airveyor discharge...

VacuSeal

VacuSeal- 3646M-HS Combination Vacuum Press, Seal Products. Works But shocks that hold up top do not work, Have to hold top open by hand.

Manchester High Pressure Air Reservoir Tank

• Manufacturer: Manchester

Manchester High Pressure Air Reservoir Tank Year- 2016 PSI- 1000 Gallons- 240 Dimensions- 93″Length x 24″ Wide Condition- Used, Very good

SIPA Model SFL4/3 XL PET Reheat Stretch Blow Molding Machine

• Manufacturer: Sipa

SIPA Model SFL4/3 XL PET Reheat Stretch Blow Molding Machine Year- 2014 Type- Linear Number of cavities- 3 Nominal production capacity- up to 4,000 bottles per hour Size range of bottles that the machine can prod...

Bekum Model H-155 Co- Ex Continuous Extrusion Blow Molding Machine

Bekum Model H-155 Co- Ex Continuous Extrusion Blow Molding Machine Type head- produces multilayer parisons Head configuration- 4 passion head with 100 mm distances between die centers Extruder diameters- (3) extr...