Used Foundry & Casting in Wallonia, Belgium

Moulding boxes, 620 mm x 600 mm x 460 mm

With trunions With bushings 4 clamping pins Weight: 110 kg/pc

1980 Moulding machine KÜNKEL WAGNER, APM.f1

• Manufacturer: Künkel Wagner

Moulding machine without foundation With pneumatic drived head pivoting With pneumatic table vibrator

Conical perforated stainless sheets for fluid beds

Only on request Stainlees sheets Conidur with double conical perforation towards the length serve for dedusting of silica sand, e.g. for inserting air aerator and moving the sand forward These sheets are only mad...

Simple floor type grinder RICHARDS Ø 760mm

Screw mixer HMS, 1 arm, ± 5 t/h

Height: inlet: 1760mm With pneumatic slide on the inlet With 2 pumps With emergency stop With control board

1989 Semi-automatic moulding plant HWS-HSP-2

• Manufacturer: HWS-Sinto

With sand hopper and extraction belt With turning table With roll-over With two-hand control board SIEMENS S5 With mould assembly station With transfer trolley With push-out station With vibrating separation channel

Vibro-loading conveyor THOMAS LOCKER

• Manufacturer: Thomas

External dimensions: Lenght: 3550mm; Hight: 2900mm (height floor-conveyor: 1630mm) Usesul dimensions: Lenght: 3100mm; on the top: 2250mm ; on the bottom 600mm; height: 700mm 2,2KW; 380V; 3PS up to air cushion vib...

Mixer for barrels for suspension coating )

• Manufacturer: Lafert

Weight: ± 50 kg | Dimensions: height 1750mm | Motor: 2,2 KW, 230/400 V, 940 rpm | Immersion depth: 1040mm | Cover: Ø 530mm

Monorail with 2 bins / sand distribution system

KBK monorail with 3 curves, 90 ° 1 bins with trailing cables and pneumatic hose Electric drive for DEMAG KBK 2 Bin opening by pneumatic flap with compressed air cylinder DEMAG KBK rails 41m, straight This plant w...

Lance for trmperature measurment Heraus Electronite with electric cable

• Manufacturer: Heraus Electronite

With cable Ø fron section 14mm wall display for extra charge

Lance for trmperature measurment Heraus Electronite with electric cable

• Manufacturer: Heraus Electronite

With cable wall display for extra charge Weight: ±15kg | Lenght: 1300+650mm

Lance for temperature measurment with electric cable

With cable wall display for extra charge Weight: ±15kg | Lenght: 1500+1630mm

Roller transfer carriage 1700 × 1000 mm

Dimensions: Lenght: 1900mm; Width: 1800mm; Hight: 820mm roller width 1000mm between axles 150mm

flexion test devicer GF /PFA with drive

• Manufacturer: GF

Dimensions: Length: 660mm; Width: 360mm; Height: 250mm With electric drive and tools for flexion testing

Sand laboratory sand compactability tester GF PVG

• Manufacturer: GF

Dimensions: Width: 215mm, Depth: 610mm, Height: 530mm with samples sleeve Ø 50mm H120 mm