Used tester in Shanghai, China

WB2671 AC/DC Withstand Voltage Test

WB267* series AC/DC withstand voltage tester is designed for safety parameters measurement of electricial products. It is widely used in household appliances, electronic instruments, electronic equipment, electro...

ZRS-3H Glow-wire Test Apparatus

The ZRS-3H Glow-wire Test Apparatus is used to test the flammability of plastic sheets or other insulating materials. The specimen is exposed to a high temperature glow wire (nickel/chrome wire) through a standar...

LS9955/56 Automatic Safety Test System

The LS9955/LS9956 Automatic Safety Test System (electrical safety analyzer) combines the following functions: Withstand Voltage Test (AC / DC), Insulation Resistance Test (IR), Leakage Current Test (LLC), Groundi...

TMP-L Lamp Cap Temperature Rise Test System

• Manufacturer: Laempe / Röperwerk

The TMP-L Lamp Cap Temperature Rise Test System is used to test the working and environmental temperature as well as temperature-rise of the burner and lamp. The TMP-L is fully meet IEC60598 and GB7000.1 Appendix...

ZY-3 Needle Flame Test

• Manufacturer: Fiamma

The ZY-3 Needle Flamp Test apparatus is mainly used for testing lighting equipment, low-voltage electrical appliances, household appliances, power tools, electronic instruments, electronic meters, etc. Additional...

LS9923 Programmable Withstanding Voltage & Insulation Test

LS9923 Programmable Withstanding Voltage & Insulation Test is an instrument for testing the electrical safety parameters of electronic products. It can be used for withstand voltage and insulation testing of hous...

ZBP-T Ball Pressure Test Device

The ZBP-T ball pressure test device is designed according to the requirements of the “ball pressure test” specified in the following standards. It is mainly used for heat resistance tests on plugs and sockets for...

TTC-1 Tracking Test Chamber

Tracking Test Chamber | Leakage Tracking Test Apparatus is primarily conducted to simulate the inspection of whether the deposition of conductive substances on the surface of insulation materials caused by differ...

LS8815 Impulse Winding Tester

The LS8815 Impulse Winding Tester are specially designed to meet the testing needs of winding components. Their working principle is to utilize a tiny high-voltage charged capacitor (with low testing energy) to f...

LS8517CX Common Mode Inductor Balance Tester

LS8517CX Common Mode Inductor Balance Tester, also known as Filter Balance Tester, is suitable for measuring the balance of Ls (inductance value) and DCR (direct current resistance) of various common mode inducto...

Auto Positioning 23 Slots Automobile Automotive Car Motor Starter Armature Testing Machine WIND-ATS-02

• Manufacturer: Wind Automation

Automotive car motor Starter armature tester analyse below items 1. Bar to Bar resistance,0.01mΩ~10mΩ (Out of range display OVER) Four-terminal measurement to ensure accuracy 2. Welding resistance,0.001mΩ-10mΩ (O...

SPA-3P6G Spectrum Analzer | Frequency Analyzers

The SPA series Spectrum Analyzer (also called Signal & Spectrum Analyzer, Frequency Analyzers or RF Spectrum Analzers) measures the magnitude of an input signal versus frequency within the full frequency range of...

Starter Armature testing panel WIND-ATS-02

Starter Motor Armature Tester test below items 1. Bar to bar resistance (Inter-chip resistance of two commutator bars) 2. Welding resistance (To check the welding quality, the smaller the better) 3. 180° Cross re...

SSBL-3P20A Test for Switches Intended for Self-ballasted Loads

• Manufacturer: Lisun

The SBLL-3P20A is used to test the load on-off capability of the self-ballasted lamp switch. Check whether the switch has continuous arc flash, whether the contacts are welded, whether there are long-term contact...

LS2736 Ferrite Core Meter

LS2736/LS2737 Magnetic Core Characteristic Tester (also known as Voltmeter-Ammeter Characteristic Tester) is an intelligent tester specially designed for ferrite core and iron core sorting equipment. It can also ...