Used Materials Testing in Zhejiang, China

Suspension Tester IT631

• Manufacturer: Innovator Tech

Features: 1, EUSAMA measurement standard; 2, Wheel load function integrated; 3, Protection program by >200kg excited vibration; 4, High precision sensor ensures the exactitude of inspection result; 5, Galvanized ...

HC-GL10 Grouting Material Strength Tester

It is used to detect the physical strength of grouting materials in prefabricated concrete grouting channels or grouting channels. The hardness value of the grout surface in the channel is detected by the surface...

HC-AQT Anchor Nondestructive Testing Instrument

Anchor rod, anchor cable length, density, defect detection. Detection length can reach 50 meters; Portable handheld design, light and compact; Synchronous transmission and reception, short aftershock, adjustable ...

HC-CC01 3D Roughness Testing System

Used to detect the depth of the rough surface of precast concrete slabs, columns, walls and the rough surface of the precast bottom plate of concrete composite slabs. A method of analyzing and calculating the dep...

Hardness Tester THT-1550

The 1550 Tablet Hardness Tester is a pharmaceutical analysis instrument designed for measuring four physical parameters of tablets: hardness, diameter, thickness, and weight. It is widely used in pharmaceutical f...

HC-MD60T/TB High Precision Rivet Puller

Suitable for testing the pull-out force of rivets used to fix insulation materials in construction projects, the bonding strength of wall insulation materials, and the bonding strength of exterior wall facing til...

HC-D10/D10X Electric Bond Strength Tester

HC-D10X electric bond strength tester is suitable for testing the pull-out force of rivets used to fix thermal insulation materials in construction projects, the bond strength of wall thermal insulation materials...

HC-HD92/HD852 Floor Thickness Tester

It is mainly used to measure the thickness of cast-in-place slabs, concrete or other non-metallic materials such as walls, columns, beams, wood and ceramics. This instrument is mainly based on the principle of el...

HC-40 Multifunctional Strength Tester

It is suitable for on-site testing of concrete strength (C10-C80) in construction projects, bonding strength of exterior wall facing bricks, and other related tensile strength. Concrete strength testing uses the ...

HC Series Intelligent Bond Strength Tester

Suitable for testing the bonding strength of exterior wall facing bricks, exterior wall insulation materials, mosaics, various plates and paints. Stainless steel body, built-in micro hydraulic system; HC-2000A us...

HCTJ-10T Carbon Fiber Bond Strength Tester

A new instrument suitable for testing the tensile bond strength between carbon fiber sheets and concrete in civil engineering structures. According to the bond strength and the failure mode during tension, the te...

HC-GZ40/60 Micro Anvil

The average rate value of the bullet impact test on the micro steel anvil is [N] = 41 ± 2/60 ± 2

HC-V1S/V3S/V5S/V10S Micro Puller

HC-VnS series micro puller is mainly used for anchor force detection of various anchors, such as anchor rods, steel bars and expansion bolts. Its test range is refined, fully in line with the latest standard requ...

HC-F900/F600 Concrete Crack Defect Comprehensive Tester

It uses ultrasonic and micro-camera technology, and is suitable for the detection of internal defects, crack depth, crack width of non-metallic materials such as concrete, graphite, nylon and their components, as...

HT-450A/550A High Strength Concrete Rebound Tester

Used for structural engineering high-rise building components, concrete components of bridges (plates, beams, columns, bridge frames), usually suitable for concrete compressive strength testing with strength grad...