Used Ibc Tanks

1050 Liter Container, Aisi 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Container bolted to a drive-under frame made of Fe (galvanized); butterfly valve very stiff (possibly defective); stacking support at the top partially slightly bent; container with small dents

1000 liter Container, Aisi 304

remarks: Foot frame, Fe (galvanized); wall height approx. 720 mm; Diameter manhole approx. 385 mm (the suspension of the manhole covers are no longer completely complete); Outlet diameter of pipe inside: 3 x 20 m...

590 liter bulk container, Aisi 304

remarks: Frame, Aisi 304; Internal dimensions approx. 1100 x 700 mm; wall height approx. 710 mm; Outlet approx. 100 x 100 mm with plastic components (probably Teflon); outlet design may vary for some containers (...

1000 liter container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: one of the containers has an additional outlet (25mm) with a butterfly valve in the cylinder (see photo)

1000 liter container, AISI304

remarks: Frame Fe (galvanized); Frame partly with signs of corrosion; Basic frame dimensions: 1030 x 1230 mm; Manhole diameter approx. 400 mm

1255 liter container, Aisi 304

• Manufacturer: Behälter KG Bremen

remarks: Frame, Fe (galvanized); hand hole diameter approx. 210 mm; 1 agitator flange and 1 cut-off connection in the manhole cover; Ball valve very stiff (possibly defective)

1070 liter heat-/coolable container, Aisi 304

• Manufacturer: Behälter KG Bremen

Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate remarks: Frame, Fe (galvanised; frames partially slightly bent and with slight signs of corrosion, especially in the out...

800 liter container, Aisi 304

remarks: Frame, Aisi 304 (partially bent struts); Type plates not available on all containers; 1 welded bracket each in the manhole collar inside (see photos); Suspensions of the manhole cover partially incomplet...

1000 liter Container, Aisi 304

remarks: Frame, Aisi 304; Container with dents, especially in the lower bottom; stack struts partially bent; 1 DN 40 connection in the container wall (see photos)

1050 liter container, Aisi 304

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame, Fe (lacquered); 1 longitudinal sight glass; ball valve glued;

550 liter container, Aisi 304

remarks: Manhole diameter approx. 410 mm; Container partially with dents

1500 liter bulk container, Aisi 316

• Manufacturer: Umformtechnik Hausach (UCON)

remarks: Frame made of AISI304/316; Manhole diameter approx. 455 mm; At the end of the cone there is 1 opening with a diameter of approx. 600 mm (closure for this opening is missing)

800 liter container, Aisi 304

remarks: Container with dents; Bent hand lever of the outlet valve on 1 container

1250 liter conical container made of stainless steel 304

• Manufacturer: Thyssen Umformtechnik (UCON)

remarks: Frame, Fe (galvanized; slightly bent in some areas); 1 container with DN 80 DIN 11851 outlet; manhole cover screw connections incomplete; container with dents