- Trusted Seller
2025 RITTER R-275 E/A CLAMP (FACE FRAME & CABINET DOOR) [CF-300123]
- Manufacturer: Ritter
- Model: R-275
RITTER - R-275 E/A, ...Face Frame & Door Assembly System Dimensions: 4' x 8' --Bed angle: 45° -- Hold down beam clamping arm with: (3) Adjustable hold down cylinders. -- (4) Universal clamping cylinders with: 3" ...
- Trusted Seller
TAYLOR 40 SECTION CLAMP CARRIER (AUTOMATIC) [CR-011128]
- Manufacturer: Taylor
- Model: 40 SECTION
TAYLOR 40 Section Clamp Carrier. Specifications: -- 40-Section, 8-1/2' width capacity -- Average 4/5 clamps per section (175 clamps total), all with 32" max. clamp opening. -- Equipped with (175) clamps plus a pa...
- Trusted Seller
2025 CANTEK CFS-100/EM-12 DEFECTOR & END MATCHER/FINGER JOINT BLOCK [EM-010002]
- Manufacturer: Cantek
CANTEK MODEL CFS100 / EM-12 DEFECT SAW AND END-MATCHING SYSTEM: Consisting of a CANTEK model "CFS-100" Optimizing Cut-Off Saw followed by a CANTEK Model "EM 12" Through-Feed End Matcher and with the following spe...
United States - Trusted Seller
2025 CAM-WOOD UTC-305 FINGER JOINTER - LONG BOARD [FJ-300034]
- Manufacturer: Cam-Wood
CAM-WOOD Continuous in-line Long Board Vertical Finger Joint System, Model "UCT-305" Up to 12 Wide x 4-1/4" Thick x Unlimited Assembled Length System Specifications: -- Incoming board lengths from 39 to 236" (1,0...
- Trusted Seller
2025 CAM-WOOD FAH TYPE F1 8-20 FINGER JOINTER (HORIZONTAL JOINT) [FJ-300032]
- Manufacturer: Cam-Wood
CAM-WOOD TYPE F1, MODEL FAH 8" X 20’ AUTOMATIC HORIZONTAL FINGER JOINT SYSTEM - SINGLE CHAIN TYPE Technical Specifications: -- Working thickness: 17 mm to 60 mm (0.66" to 2-3/8") -- Working width: 25 mm to ...
$561,250 USDUnited States - Trusted Seller
2025 CAM-WOOD FAH TYPE F1X FINGER JOINTER (HORIZONTAL JOINT) [FJ-300030]
- Manufacturer: Cam-Wood
CAM-WOOD TYPE F1, MODEL FAH 8" X 30’ HORIZONTAL FULLY AUTOMATIC FINGER JOINT SYSTEM - SINGLE CHAIN TYPE MECHANICAL SPECIFICATIONS FOR THE FEED SYSTEM: -- Operating speed: 120 to 150 lugs/Min -- Intermittent...
$505,800 USDUnited States - Trusted Seller
2025 CAM-WOOD FSG-150X GLUE APPLICATOR (FINGER JOINT) [FJ-300028]
- Manufacturer: Cam-Wood
CAM-WOOD MODEL FSG-150X Manual FINGER JOINT GLUE APPLICATOR -- Manual operation of sliding table ; Specification: -- Glue roller type -- Working width 24" maximum -- Working thickness 6" -- Glue roller drive 1/2 ...
- Trusted Seller
2025 QUICK 20 SECTION HEAVY DUTY-H CLAMP CARRIER (HYDRAULIC) [CR-010832]
- Manufacturer: QUICK
QUICK 20 Section 16.5' Heavy Duty Clamp Carrier Specifications: -- 20-Section Thick Stock Pneumatic Clamp Carrier; 16-1/2' width cap.; -- (12) Clamps, each with 3 1/2" high jaws and 44" clamp opening for a total ...
- Trusted Seller
2025 RITTER R-200 E/A CLAMP (FACE FRAME & CABINET DOOR) [CF-300121]
- Manufacturer: Ritter
- Model: R-200
RITTER R-200 E/A Face Frame Assembly Easel Dimensions 5' x 12' with 45° Bed angle; Specifications: -- Hold-down beam with (5) adjustable hold down cylinders. -- Squaring bars on left, right and bottom sides. -- ...
- Trusted Seller
2025 CAM-WOOD IAT-620-6-195X FINGER JOINTER (MEDIUM PRODUCTION) [FJ-300026]
- Manufacturer: Cam-Wood
CAM-WOOD IAT 620-150H INVERTER DRIVEN FINGER JOINT SYSTEM 3" X 6": Lay-Up and Block-Staging Infeed Conveyor: -- 24" Wide x 31.5" long belt conveyor powered with 1/2 HP motors. Conveyor is controlled by the operat...
United States - Trusted Seller
2025 QUICK 40 SECTION HEAVY DUTY-AC CLAMP CARRIER (AUTOMATIC HYDRAULIC) [CR-300013]
- Manufacturer: QUICK
QUICK 40-Section HEAVY DUTY HYDRAULIC CLAMP CAFRRIER with 8-1/2' Width cap. -- Clamp Carrier with: (6) Clamps per section, (240) total Heavy Duty zinc plated "Quick-Adj" fast adjusting clamps; 32" opening on clam...
- Trusted Seller
RITTER R-200 CLAMP (FACE FRAME) [CF-011412]
- Manufacturer: Ritter
- Model: R-200
RITTER R-200 Face Frame Clamp. -- 60" x 144" Frame assembly clamp with floor stand, high pressure laminate working surface at approx. 30ø angle. -- (5) overhead air cylinders mounted on an overhead beam adjustabl...
$3,250 USDUnited States - Trusted Seller
![CANTEK EM-12 END MATCHER [EM-010161]](https://i.machinio.com/thumb/11697cj/3564064986/ddf6/cantek-em-12-end-matcher-em-010161.jpg)
CANTEK EM-12 END MATCHER [EM-010161]
- Manufacturer: Cantek
CANTEK - EM-12: Finger Jointer / End Matcher Machine arranged to Finger Joint but can be easily converted to End Match. Specifications -- 1.6" to 12" Width x 3/8" to 1-3/8" thickness x 10.6" min. length capacity....
United States - Trusted Seller
2025 CAM-WOOD IAH-SC FINGER JOINTER (MEDIUM PRODUCTION) [FJ-300038]
- Manufacturer: Cam-Wood
CAM-WOOD IAH-SC Inverter Drive, End-Less Auto Finger Jointer System Finger jointer shaper with gluer and troughfeed press for unlimited length Techincal Specifications: -- Infeed timber working length(min-max) L ...
- Trusted Seller
FRIULMAC RANDOMAT- MULTIREX END MATCHER [EM-010160]
- Manufacturer: Friulmac
FRIULMAC - MULIREX: End Matcher with: Stackable Spindles End Matcher with: Stackable Spindle for fast Changeover! Equipped with: -- (2) Profiling Motors: 10 HP (7.5 kW). -- (2) Tool changer motors: 1/2 HP (0.25 ...
United States 
Pillar Machine CXEP Boring, Dowel inserting, Gluing
- Manufacturer: Pillar Machine
- Model: CXEP
Good condition Pillar Machine CXEP Boring, Dowel inserting, Gluings. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword