Lecroy HFP1000
- Manufacturer: Lecroy
- Model: HFP1000
1 GHz Active Voltage Probe Input capacitance: 0.7 pF | Dc input resistance: 100 kΩ | Other features: All AutoColor ID probe to channel identification | Bandwidth: 1 GHz | Lf accuracy: 1% | Dynamic range: ± 8 V ...
$1,150 USDFarmingdale, NJ
Lecroy AP034
- Manufacturer: Lecroy
- Model: AP034
Lecroy AP034 Active Differential Probe, 1 GHz Main Features of AP034 * 1 GHz Bandwidth * x1 Gain ÷10 and ÷20 External Attenuators * 1.5 pF/Side Input C 2 mV/div - 2 V/div * Input Protection * Autobalance Feature
$1,990 USDFarmingdale, NJ
Lecroy AP033
- Manufacturer: Lecroy
- Model: AP033
The LeCroy AP033 is a high-performance active differential probe. High bandwidth, excellent common mode rejection ratio (CMRR) and low-noise floor make the LeCroy AP033 ideal for applications such as disk drive d...
$1,885 USDFarmingdale, NJ
Lecroy ADP300
- Manufacturer: Lecroy
- Model: ADP300
Leading Specifications 20 MHz and 100 MHz bandwidth 1,000 VRMS common mode voltage 1,400 Vpeak differential voltage EN61010 Cat III 80dB CMRR at 50/60 Hz ProBus® system Full remote control Compatible with LC Seri...
$1,045 USDFarmingdale, NJ- Trusted Seller
Cary, NC - Trusted SellerCary, NC
- Trusted Seller
LeCroy LSA1000
- Manufacturer: Lecroy
- Model: LSA1000
1Ghz (2GS/s) Digitizer/Digital Oscilloscope (Ethernet) Bandwidth (-3 dB): @50 W: DC to 1 GHz Number of Channels: 2 Number of Digitizers: 2 Sampling Rate: 2 ch. in use: 1 MS/s to 1 GS/s 1 ch. in use: 2 MS/s to 2 G...
Cary, NC 
Teladyne LeCroy ZD1000
- Manufacturer: Lecroy
- Model: ZD1000
Details The Teledyne LeCroy ZD1000 is an active differential oscilloscope probe with a 1 GHz bandwidth and 10:1 attenuation, featuring only 1 pF input capacitance and a high 1 MΩ input impedance. It supports ±18 ...
Dublin, Ireland
Teladyne LeCroy ZS1000
- Manufacturer: Lecroy
- Model: ZS1000
Details The Teledyne LeCroy ZS1000 is a high-impedance active probe offering 1 GHz analog bandwidth and 10:1 attenuation ratio, ideal for capturing high-frequency signals with minimal distortion. It features 1 MΩ...
Dublin, IrelandLecroy PP005A
- Manufacturer: Lecroy
- Model: PP005
Passive probes are the standard probe provided with most oscilloscopes. Typical passive probes provide a 10:1 attenuation and feature a high input resistance of 10 MO. This high input resistance means that passiv...
Farmingdale, NJ
Lecroy PP002
- Manufacturer: Lecroy
- Model: PP002
Form Factor Probe Instrument application Oscilloscope Measurement Parameter Voltage Probe type Passive Minimum Frequency 0 Hz Maximum Frequency 350 MHz Attenuation x10 Input Impedance 10 MOhm Input Capacitance 14...
Shenzhen, China
Lecroy PP005
- Manufacturer: Lecroy
- Model: PP005
Form Factor Probe Instrument application Oscilloscope Measurement Parameter Voltage Probe type Passive Minimum Frequency 0 Hz Maximum Frequency 500 MHz Attenuation x10 Input Impedance 10 MOhm Input Capacitance 11...
Shenzhen, China
LECROY AP020 Active Probe
- Manufacturer: Lecroy
- Model: AP020
Lecroy AP020 Oscilloscope Active Probe Bandwidth of DC to 1000MHz. Input ZM(ohm) of 1. Input CpF of 1.8. Attenuation factor of 10:1. Dynamic Range(V) of 10. DC offset Range(V) of +/-20.
Singapore
Teledyne LeCroy CA10-QUADPAK
- Manufacturer: Lecroy
- Model: CA10-QUADPAK
Teledyne LeCroy CA10-QUADPAK Details Teledyne LeCroy CA10-QUADPAK Set of 4 CA10 Programmable Current Sensor to ProBus Adapters for third-party current sensors The CA10 is a programmable and customizable interface...
Lake Mary, FL
Teledyne LeCroy WaveAce 1012
- Manufacturer: Lecroy
- Model: Waveace
Teledyne LeCroy WaveAce 1012 Details Teledyne LeCroy WaveAce 1012 Bandwidth: 100 Mhz Channels: 2 100MHz Oscilloscope Teledyne LeCroy WaveAce 1012; 100 MHz, 500 MS/s, 2 Ch, 1 Mpts/Ch with 7" Color Display. 1 GS/s...
Lake Mary, FL
Tip: Enter manufacturer, model or keyword