Used Foundry & Casting in Baden-Württemberg, Germany

1999 OMS Die Casting Cell

consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...

2007 Frech DAK 580/62 Die Casting Cell

• Manufacturer: Frech

consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...

2017 ROBAMAT 2212

• Manufacturer: ROBAMAT

Used heating and cooling unit from Robamat for use on die casting machines. This dual-circuit unit is designed for controlling the temperature of a die casting tool with water. The unit has been tested, serviced,...

2014 FRECH ZC200/250

• Manufacturer: Frech

Used machine furnace, Meltec type ZC 200/250, for use on Oskar Frech DAW 200 hot-chamber die-casting machines for processing zinc alloys. Melting capacity per hour: 250 kg/h, 36 kW power rating. Control cabinet w...

2000 FRECH DAW 80S

• Manufacturer: Frech

Refurbished DAW 80 GO die-casting machine with DataLogic control for zinc alloys. Available upon request.

1994 FRECH MOS 5/20 U

• Manufacturer: Frech

Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet

2004 Robamat 5201

• Manufacturer: Robamat

Used heater from Robamat for use on die casting machines. This single-circuit unit is designed for controlling the temperature of a die casting tool with oil. Dismantled from ongoing production. The unit was test...

1998 FRECH Weightcontrol 2000

• Manufacturer: Frech

Used scale for use on die casting machines with a piece weight of up to 2000g. The device was inspected and repaired by the manufacturer. Load cell and control board replaced.

1992 FRECH DAW 50

• Manufacturer: Frech

Used DAW 50 die-casting machine with SBC2 control for zinc alloys. Available from our used machine warehouse. The machine is equipped with a Rauch MO50E electric furnace and a used Oskar Frech 401 pneumatic spray...

2001 FRECH M200/120

• Manufacturer: Frech

Used machine furnace, Meltec type M 200/120, for use on Oskar Frech hot-chamber die-casting machines with a 200-ton capacity for processing magnesium alloys. Melting capacity per hour: 120 kg/h, 54 kW power ratin...

2003 Frech Espana DAW 125 PD SBC3

• Manufacturer: Frech

Used DAW 125 die-casting machine with SBC3 control for zinc alloys. Available as a base for a general overhaul at the manufacturer's factory.

1995 FRECH DAW 200S

• Manufacturer: Frech

Used DAW 200 S die-casting machine with Datavario control for zinc alloys. Available upon request. The manufacturer recommends a general overhaul at the overhaul facility. This can be carried out to the extent re...

1999 FRECH DAM 315 S

• Manufacturer: Frech

Used DAM 315 S die-casting machine with Datacontrol control for magnesium alloys. Available from our used machine warehouse. The machine is equipped with a Rauch MMO 315E electric furnace. No spraying device. The...

2024 FRECH W200Zn-ST

• Manufacturer: Frech

Machine Equipment 1.1.1 Motorized safety door, right in the pouring direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - Energy efficiency 2.0.1 Ejector assistance packages ...

1993 RAUCH MO 50 E

• Manufacturer: Rauch

Used Rauch furnace, type MO50E, including used cast iron pan, base, and control cabinet. Heating output 17.5 kW at 3 x 400 V 50 Hz Suitable for DAW 40 and DAW 50