Used Extruders

Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH
Trusted Seller
3.5" Davis Standard Cold Feed Rubber Extruder
- Manufacturer: Davis-Standard
3.5" Davis Standard Cold Feed Rubber Extruder Used 3.5" Davis Standard cold feed rubber extruder, model 35IN35, electrically heated, water cooled barrel, powered roller strip feeder section, Thermatic gearbox, 17...
Cleveland, OH
Trusted Seller
0.25" Brabender Extruder, 48:1 L/D
- Manufacturer: Brabender
0.25" Brabender Extruder, 48:1 L/D Used 0.25" Brabender extruder, electrically heated, air cooled barrel, 48:1 L/D, driven by 2 hp, 180 volt motor with VFD, controls on frame.
Cleveland, OH
Trusted Seller
10" Ventura Hydraulic Fab Horizontal Ram Extruder
- Manufacturer: Ventura Hydraulic Fabricators
10" Ventura Hydraulic Fab Horizontal Ram Extruder Used 10" Ventura Hydraulic Fabricators horizontal ram extruder, approximately 8" x 12" feed opening with screen changer, hydraulically operated less pump.
Cleveland, OH
Trusted Seller
2.5" Davis Standard Extruder, 24:1, 50 HP
- Manufacturer: Davis-Standard
2.5" Davis Standard Extruder, 24:1, 50 HP Used 2.5" Davis Standard extruder, model 25IN25H, 24:1 L/D, electrically heated, air cooled, jacketed feed section, top vented and plugged barrel, 17.2:1 gearbox ratio, 1...
Cleveland, OH
Trusted Seller
Filabot EX6 Filament Extruder
- Manufacturer: FILABOT
“Used” Model number: EX6 | Mpn: EX6 | Shipping weight: 75 lbs | Shipping dimensions: 39 x 20 x 12 in | Reference sku: 1696134
$9,327 USD
Get financing
Est. $183/mo
Delta, OH
Trusted Seller
4.5" NRM Extruder, 20:1 L/D, 150 HP
- Manufacturer: NRM
4.5" NRM Extruder, 20:1 L/D, 150 HP Used 4.5" NRM Pacemaker extruder, 20:1 L/D, electrically heated, air cooled, 150 HP DC motor with SCR, control panel with 4 barrel, 1 die zone with temperature controllers.
Cleveland, OH
Trusted Seller
Killon Davis 2-1/2" Hot Melt Rubber Extruder
- Manufacturer: Killon Davis
2 1/2'' Killon Davis Hot Melt Rubber Extruder with power Roll Feed 12.8 to1 L.D. 3 Barrel Zones two Die Zones Air Cooled Eurotherm Controls with Amp Meters Melt Pressure RPM and Amp 40 H.P. D.C. 900 Hrs on...
$38,870 USD
Get financing
Est. $732/mo
Ohio, USA
Trusted Seller
Davis Standard 450 S D8856 Extruder Gear Box
- Manufacturer: Davis-Standard
- Model: 450 S D8856
Rebuilt 4.5" Davis Standard Extruder Gear Box Model 450 S D8856 Serial #E3162 S.O. No 46258C 17:1 Gear Ratio 100 RPM H.P. 180
$28,125 USD
Get financing
Est. $529/mo
Ohio, USA
Trusted Seller
0.75" Brabender Extruder, 25:1 L/D, Model 2503
- Manufacturer: Brabender
- Model: 2503
0.75" Brabender Extruder, 25:1 L/D, Model 2503 Used 0.75" Brabender extruder, model 2503, 25:1 l/d, electrically heated, 3 barrel zones, 1 die zone, 3 hp motor, with control panel, 230 volt, serial# 1313.
Cleveland, OH
Trusted Seller
1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath
- Manufacturer: Killion
1.25" Killion Extruder, 24:1 L/D, 5 HP with Bath Used 1.25" Killion single screw extruder, 24:1 L/D, electrically heated, air cooled barrel, jacketed feed section, driven by 5 hp DC motor drive, on stand with co...
Cleveland, OH
Trusted Seller
LCI Fuji Paudal MultiGranulator Extruder, Model MG-55
- Manufacturer: Fuji Paudal
LCI Fuji Paudal MultiGranulator Extruder, Model MG-55 LCI (Fuji Paudal) Multi-Gran, MultiGranulator Lab Extruder, Model MG-55, SN 351155, (In Shared Crate).
Cleveland, OH
Farrel 18x15 Dump Extruder
- Manufacturer: Farrel
Item 6330 - One (1) Used Farrel 18x15" Rubber Dump Extruder, drop extruder, hot feed extruder, feed opening 26” wide x 23.5” deep, 29.2 gearbox ratio, 400 HP 850/2000 RPM, 500 VDC motor, REBUILT SCREW & BARREL, d...
Cleveland, OH
Trusted Seller
Davis Standard 6" Single Screw Extruder System
- Manufacturer: Davis-Standard
6" Davis Standard Single Screw Extruder • 400 HP DC motor and Drive • Set up for water cooling, some heater bands have been replace with ceramic heaters non water cooling. • 8 zones barrel zones 5 die zones ...
$136,275 USD
Get financing
Est. $2,565/mo
Ohio, USA
Trusted Seller
18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D
- Manufacturer: Leistritz
18 MM Leistritz Twin Screw Extruder, Model MIC18PH/GL-35D Used Leistritz twin screw extruder, model MIC18PH/GL-35D, 18 mm screws, co-rotating screws, 35:1 l/d, 500 rpm screw speed, electrically heated, water cool...
Cleveland, OH
Cincinnati CMT Extruder
- Manufacturer: Cincinnati
- Model: CMT
Good condition Cincinnati CMT Extruders manufactured in 2018. Located in Italy and other countries. Click request price for more information.
Italy