Building Filters

Used Leadermac Planers And Moulders in USA

Trusted Seller
Leadermac Speedmac LMC-923SP Nine Head Moulder Stock #47975
- used
- Manufacturer: Leadermac
- Model: Speedmac
Leadermac Nine-Head High Speed Moulder with Opposing Side Heads for Strip Flooring Infinitely Variable Speed Feed from 20 - 260 FPM VFD for Variable Speed All Heads are 230/460v, 3ph Outboard Bearings for All Hor...
Hughesville, PA
Trusted Seller
2007 Leadermac Hypermac 633H Moulder
- used
- Manufacturer: Leadermac
Leadermac Hypermac 633 Moulder 6-Head Moulder 12" Width Capacity
USA
Leadermac LMC623 9", 6-Head Heavy-Duty Jointed Moulder, 33 to 300FPM Feed Rate, 25HP Heads
- new
- Manufacturer: Leadermac
Leadermac LMC623 9", 6-Head Heavy-Duty Jointed Moulder, 33 to 300FPM Feed Rate, 25HP Heads - All spindles have variable frequency drives 4500 - 8000 RPM that act as fully electronic spindle brakes - 1 13/16” di...
Sheboygan, WI
Leadermac LMC530C 5-Head Compact Throughfeed Mouler
- new
- Manufacturer: Leadermac
Leadermac LMC530C 5-Head Compact Throughfeed Mouler 1st Bottom head: 15HP, 4.9" - t.3" cutterhead swing Right Side Head: 10HP, 4.4" - 8" cutterhead swing Left Side Head: 15HP, 4.4" - 8" cutterhead swing Top H...
$102,000 USD
Get financing
Est. $1,920/mo
Sheboygan, WI
Trusted Seller
Leadermac LMC623H Moulder with Infeed Deck
- used
- Manufacturer: Leadermac
Leadermac LMC-623H Moulder with Infeed Deck This system has not run in year and will need repair.
USA
Trusted Seller
Leadermac LMC-418S 4-Head Moulder
- used
- Manufacturer: Leadermac
Leadermac LMC 418-S 4 head moulder 20-80 FPM feed spiral head on bottom 460 volt 3 phase
USA
Trusted Seller
LEADERMAC LMC 418 SMARTMAC 8" 4-HEAD MOULDER
- used
- Manufacturer: Leadermac
LEADERMAC LMC 418 SMARTMAC 8", 4-HEAD MOULDER (~2019), (460/60/3 electrics), H-2046 Working Capacity - 8” x 5” maximum working capacity, (.6” wide x .250 thick min. capacity) - 8” min. workpiece length capaci...
United States
Trusted Seller
2010 Leadermac LMC-630C 12" x 6" Moulder
- used
- Manufacturer: Leadermac
Leadermac 630C 12" x 6" capacity this one available NOW Currently not under power
USA
Trusted Seller
2025 LEADERMAC LMC-523S MOULDER (FEED THROUGH) [MF-012292]
- new
- Manufacturer: Leadermac
- Model: LMC-523S
LEDERMAC 523S "SMARTMAC" Feed Through Moulder; 5-Head (B-R-L-T-B) with a working cap. 9" x 5". -- Head sequence: Bottom 7.5 HP, right/left 15 HP, top 15 HP and bottom 10 HP motor. -- Spindle dia. 40 mm with cutte...
United States
Trusted Seller
2025 LEADERMAC LMC-623C MOULDER (FEED THROUGH) [MF-300024]
- new
- Manufacturer: Leadermac
- Model: LMC-623C
LEADERMAC 623C Moulder Feed Through 6-Head (B-R-L-T-T-B), working cap. 9-1/16" x 6" capacity. -- Head sequence: Bottom 10 HP, right 10 HP, left 10 HP motor, top 15 HP, top 20 HP, and bottom 15 HP motor. -- Spindl...
United States
Leadermac HSK spindle option
- new
- Manufacturer: Leadermac
We excited to share that Leadermac USA is now stocking moulders equipped with HSK spindles, available for immediate delivery and start-up
United States
Leadermac LMC 418 Smartmac 8" 4-Head Moulder
- new
- Manufacturer: Leadermac
Leadermac LMC 418 Smartmac 8" 4-Head Moulder Features: • Width material .6” to 8” • Thickness material ¼” to 5” • Min. length of material 8” (butt fed) • Axial adjust. side heads: 1.6” (40 mm) • Axial adjus...
West Coast, USA
LEADERMAC SPEEDMAC LMC-623SP 9" 6 HEAD HIGH SPEED HEAVY DUTY MOULDER
- used
- Manufacturer: Leadermac
- Model: Speedmac
Turner's Machinery al@tunersmachinery.com Phone (805) 525-2171
Santa Paula, CA
2018 Leadermac 518S
- used
- Manufacturer: Leadermac
LEADERMAC 518S SMARTMAC THOUGH FEED MOULDER WITH TOOLING GREAT START UP MOULDER/PLANER WITH WORKING WIDTH TO 180MM (7"). PLENTY OF HP FOR MANY COMBINATIONS OF MOULDINGS. Spindle Configuration: B-R-L-T-B Working c...
$30,500 USD
Get financing
Est. $574/mo
United States
2012 Leadermac 623C
- used
- Manufacturer: Leadermac
LEADERMAC 623C FEED THROUGH MOULDER IN GOOD RUNNING CONDITION. READY TO SHIP VOLTAGE SET FOR SMALLER SHOPS WITH LOW AMP SPACE. GOOD OPERATING CONDITION READY TO SHIP! Working capacity: 9-1/16” x 4” Motors: Bottom...
United States
Leadermac Speedmac Planers and Moulder
- used
- Manufacturer: Leadermac
- Model: Speedmac
Good condition Leadermac Speedmac Planers and Moulders manufactured in 2004. Located in USA and other countries. Click request price for more information.
USA