Test, Lab, Medical equipment » Lasers & Light Sources

Search By Manufacturer

Search By Country

Building Filters

11

Used voltage detection

  • PL Series Narrow Pulse LIV

    PL Series Narrow Pulse LIV Test System

    • Manufacturer: 普赛斯/Precise

    Introduction: PL series products have the functions of narrow output current pulse, large output pulse current, support pulse light peak power detection, support laser voltage measurement, etc. Product Introducti...

    Beijing, China
  • TOPTICA DLC pro: Digital Control

    TOPTICA DLC pro: Digital Control

    • Manufacturer: Toptica

    Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...

    Munich, Germany
  • TOPTICA DLC pro: Digital Control

    TOPTICA DLC pro: Digital Control

    • Manufacturer: Toptica

    Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...

    Munich, Germany
  • GUVS-T10EC-xLW360 Tecnosens

    GUVS-T10EC-xLW360 Tecnosens

    • Manufacturer: Tecnosens

    Features: 360�� Lateral Light Detection, UVA/B/C Detection, Water Environment (<10 bar), Single Supply Voltage, Optional Output Type (0-5 V or 4-20 ���). Application: Measurement of Light Intensity in Multiple Li...

    Brescia, Italy
  • TOPTICA SHG pro

    TOPTICA SHG pro

    • Manufacturer: Toptica

    Compact module for resonant frequency doubling Best cw conversion rates Wavelengths: 205 .. 800 nm, linewidth dependant on seed laser Highest stability and Ease of Use: pro technology For Ti:Sapphire, dye, gas, f...

    Munich, Germany
  • TOPTICA DL-SHG pro

    TOPTICA DL-SHG pro

    • Manufacturer: Toptica

    Resonant frequency doubling stage Wavelengths: 210 .. 680 nm, linewidth 1 .. 120 kHz AutoAlign, PowerLock and FiberMon options With digital control DLC pro: Less drift & linewidth The grating stabilized diode las...

    Munich, Germany
  • TOPTICA TA-FHG pro

    TOPTICA TA-FHG pro

    • Manufacturer: Toptica

    Two resonant frequency doubling stages SUV and AutoAlign options - unprecedented DUV power & lifetime PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA-FHG pro is a ...

    Munich, Germany
  • TOPTICA FALC 110 & mFALC

    TOPTICA FALC 110 & mFALC 110

    • Manufacturer: Toptica

    For linewidth reduction and phase locking (mFALC) PID regulator with less than 15 ns signal delay 90° phase delay at 45 MHz Addresses laser current (fast) and slow element (drift) Sub-Hz laser linewidths demonstr...

    Munich, Germany
  • TOPTICA MSHG pro

    TOPTICA MSHG pro

    • Manufacturer: Toptica

    Highly-stable resonant frequency-doubling stage Spectral coverage 330 .. 780 nm with power up to 2 W from PM fiber Includes AutoAlign for coupling into amplifier chip, doubling stage and output fiber Low noise an...

    Munich, Germany
  • TOPTICA TA-SHG pro

    TOPTICA TA-SHG pro

    • Manufacturer: Toptica

    Resonant frequency doubling stage Wavelengths: 330 .. 780 nm, linewidth 1 .. 120 kHz AutoAlign and FiberMon options PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA...

    Munich, Germany
  • TOPTICA MTA pro

    TOPTICA MTA pro

    • Manufacturer: Toptica

    Up to two lasers in TA pro, BoosTA pro or DL/DFB pro configuration Spectral coverage 369 .. 1770 nm with powers up to 2 W from PM fiber Includes AutoAlign for coupling into tapered amplifier and output fibers Low...

    Munich, Germany

Overview

Lasers and light sources are essential tools in various industries, including manufacturing, medical, and scientific research. These devices emit focused light beams used for cutting, engraving, medical procedures, and experiments. Depending on the application, lasers can vary in power, wavelength, and design.

FAQ

What should I consider when buying a used laser or light source?

Check the device's power rating, wavelength, and overall condition. Ensure it meets the requirements for your specific application and verify any available maintenance records.

How do I ensure the laser or light source is shipped safely?

Use a transport service experienced in handling delicate equipment. Ensure the device is properly packaged, with adequate cushioning and protection against shocks.

What is the maintenance schedule for lasers and light sources?

Regular maintenance includes cleaning optical components, ensuring proper cooling, and checking electrical connections. Refer to the manufacturer’s manual for specific maintenance guidelines.