Test, Lab, Medical equipment » Lasers & Light Sources » Bavaria

Building Filters

10

Used analog output modules in Bavaria, Germany

TOPTICA iBeam smart
- Manufacturer: Toptica
Single mode, TEM00 laser from 375 to 1064 nm FINE and SKILL to eliminate noise and speckle CW or analog, digital, and mixed modulation operation Analog and Digital Modulation up to 250 MHz True one box solution, ...
Munich, Germany
TOPTICA iBeam smart PT
- Manufacturer: Toptica
COOLDC: ultra stable permanent fiber coupling FINE and SKILL to eliminate noise and speckle CW or analog, digital, and mixed modulation operation Analog Modulation up to 1 MHz and Digital Modulation up to 250 MHz...
Munich, Germany
TOPTICA FALC 110 & mFALC 110
- Manufacturer: Toptica
For linewidth reduction and phase locking (mFALC) PID regulator with less than 15 ns signal delay 90° phase delay at 45 MHz Addresses laser current (fast) and slow element (drift) Sub-Hz laser linewidths demonstr...
Munich, Germany
TOPTICA SHG pro
- Manufacturer: Toptica
Compact module for resonant frequency doubling Best cw conversion rates Wavelengths: 205 .. 800 nm, linewidth dependant on seed laser Highest stability and Ease of Use: pro technology For Ti:Sapphire, dye, gas, f...
Munich, Germany
TOPTICA Mid Infrared Tunable Laser
- Manufacturer: Toptica
1.43 - 4.2 µm (2400 - 7000 cm-1) Narrow linewidth: 2 MHz (1·10-4 cm-1) Hands-free motorized tuning 300 GHz (10 cm-1) mode-hop-free tuning range Easy all-digital DLC pro control Mid-infrared tunable lasers between...
Munich, Germany
TOPTICA TOPO smart
- Manufacturer: Toptica
Probe molecular vibrations, economically Optimized for spectroscopy from 2600 - 3500 nm Narrow linewidth and fine tuning across O-H, N-H, C-H vibrations Hands-free, digital control The TOPO smart is a continuous-...
Munich, Germany
TOPTICA TA pro
- Manufacturer: Toptica
Wavelengths between 632 nm and 1590 nm High power up to 4 W Low noise and drift, narrow linewidth Stable and reliable with pro technology Convenient touch, knob and remote control with DLC pro The TA pro is the f...
Munich, Germany
TOPTICA DLC pro: Digital Control
- Manufacturer: Toptica
Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...
Munich, Germany
TOPTICA DLC pro: Digital Control
- Manufacturer: Toptica
Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...
Munich, Germany
TOPTICA DL pro
- Manufacturer: Toptica
Intelligent locking to absorption lines or HighFinesse wavelength meters Convenient local and remote operation (with DLC pro) Efficient atom cooling with narrow linewidth down to 0.6 kHz free running Linewidth be...
Munich, Germany

Overview

Lasers and light sources are essential tools in various industries, including manufacturing, medical, and scientific research. These devices emit focused light beams used for cutting, engraving, medical procedures, and experiments. Depending on the application, lasers can vary in power, wavelength, and design.

FAQ

What should I consider when buying a used laser or light source?

Check the device's power rating, wavelength, and overall condition. Ensure it meets the requirements for your specific application and verify any available maintenance records.

How do I ensure the laser or light source is shipped safely?

Use a transport service experienced in handling delicate equipment. Ensure the device is properly packaged, with adequate cushioning and protection against shocks.

What is the maintenance schedule for lasers and light sources?

Regular maintenance includes cleaning optical components, ensuring proper cooling, and checking electrical connections. Refer to the manufacturer’s manual for specific maintenance guidelines.