Test, Lab, Medical equipment » Lasers & Light Sources » Bavaria

Search By Manufacturer

Building Filters

34

Used power source in Bavaria, Germany

  • TOPTICA MTA pro

    TOPTICA MTA pro

    • Manufacturer: Toptica

    Up to two lasers in TA pro, BoosTA pro or DL/DFB pro configuration Spectral coverage 369 .. 1770 nm with powers up to 2 W from PM fiber Includes AutoAlign for coupling into tapered amplifier and output fibers Low...

    Munich, Germany
  • TOPTICA DFB pro

    TOPTICA DFB pro

    • Manufacturer: Toptica

    Single-frequency laser with distributed-feedback diode Available wavelengths: 633 nm, 760 nm .. 3500 nm Mode-hop free tuning range: Up to 1400 GHz Reliable operation even in harsh environments 3 laser heads – wid...

    Munich, Germany
  • TOPTICA Mid Infrared Tunable Laser

    TOPTICA Mid Infrared Tunable Laser

    • Manufacturer: Toptica

    1.43 - 4.2 µm (2400 - 7000 cm-1) Narrow linewidth: 2 MHz (1·10-4 cm-1) Hands-free motorized tuning 300 GHz (10 cm-1) mode-hop-free tuning range Easy all-digital DLC pro control Mid-infrared tunable lasers between...

    Munich, Germany
  • TOPTICA CTL

    TOPTICA CTL

    • Manufacturer: Toptica

    Wide mode-hop-free tuning (up to 130 nm) Available at wavelengths between 750 nm and 1750 nm High resolution (down to kHz level) Perform measurements at the (quantum) limit with low noise & drift (linewidth < 1 k...

    Munich, Germany
  • TOPTICA DL-SHG pro

    TOPTICA DL-SHG pro

    • Manufacturer: Toptica

    Resonant frequency doubling stage Wavelengths: 210 .. 680 nm, linewidth 1 .. 120 kHz AutoAlign, PowerLock and FiberMon options With digital control DLC pro: Less drift & linewidth The grating stabilized diode las...

    Munich, Germany
  • TOPTICA FemtoFErb 1950

    TOPTICA FemtoFErb 1950

    • Manufacturer: Toptica

    Frequency shifted Er-doped fiber laser Short pulse emission < 100 fs @ 1950 nm Alignment-free all-fiber setup, use of PM fibers only SAM mode-locking technology Compact design: optics and electronics just in one ...

    Munich, Germany
  • TOPTICA FemtoFiber smart 780

    TOPTICA FemtoFiber smart 780

    • Manufacturer: Toptica

    Up to 140 mW avg. power with typ. 85 fs pulses Alignment-free all-fiber setup, use of PM fibers only Free-beam output with excellent TEM00 mode Compact design: optics and electronics just in one box Low power con...

    Munich, Germany
  • TOPTICA DLC pro: Digital Control

    TOPTICA DLC pro: Digital Control

    • Manufacturer: Toptica

    Operator controls: Touch Display, 10 push buttons, 4 knobs, 1 key switch | Display: 7 inch, 800 x 480 pixels, 262 k colors | Touch panel: Projective capacitive (PCT) with multi-touch capability | Interfaces: Eth...

    Munich, Germany
  • TOPTICA TopWave 405

    TOPTICA TopWave 405

    • Manufacturer: Toptica

    New: up to 2 Watt @ 405 nm Low cost of operation Excellent beam quality, typical M² = 1.15 Coherence length > 100 m NEW: the TopWave XP 405 — a high-power 2 W laser at 405 nm, expanding the TopWave series for dem...

    Munich, Germany
  • TOPTICA FemtoFiber ultra 920

    TOPTICA FemtoFiber ultra 920

    • Manufacturer: Toptica

    Brighter images with Clean Pulse technology Fully turn-key with integrated AOM and GDD No noise-stress for animals thanks to fan-free passive cooling Compact laser design saving valuable table space Low cost of o...

    Munich, Germany
  • TOPTICA BoosTA pro

    TOPTICA BoosTA pro

    • Manufacturer: Toptica

    Up to 4 W single mode output power, gain up to 20 dB Available wavelengths 632 nm .. 1590 nm Compact Amplifier operated with DLC pro or stand alone driver Maintains spectral properties of master oscillator Inp...

    Munich, Germany
  • TOPTICA TA-SHG pro

    TOPTICA TA-SHG pro

    • Manufacturer: Toptica

    Resonant frequency doubling stage Wavelengths: 330 .. 780 nm, linewidth 1 .. 120 kHz AutoAlign and FiberMon options PowerLock output power stabilization With digital control DLC pro: Less drift & linewidth The TA...

    Munich, Germany
  • TOPTICA MSHG pro

    TOPTICA MSHG pro

    • Manufacturer: Toptica

    Highly-stable resonant frequency-doubling stage Spectral coverage 330 .. 780 nm with power up to 2 W from PM fiber Includes AutoAlign for coupling into amplifier chip, doubling stage and output fiber Low noise an...

    Munich, Germany
  • TOPTICA TA pro

    TOPTICA TA pro

    • Manufacturer: Toptica

    Wavelengths between 632 nm and 1590 nm High power up to 4 W Low noise and drift, narrow linewidth Stable and reliable with pro technology Convenient touch, knob and remote control with DLC pro The TA pro is the f...

    Munich, Germany
  • TOPTICA FemtoFErb 1560 FD6.5

    TOPTICA FemtoFErb 1560 FD6.5

    • Manufacturer: Toptica

    6.5 meter fiber length (standard) Single-mode, polarization-maintaining fibers Dispersion compensation integrated in laser head Short pulses (typ. 50 fs) at fiber output FC/APC connectors on external fibers, deta...

    Munich, Germany
123

Overview

Lasers and light sources are essential tools in various industries, including manufacturing, medical, and scientific research. These devices emit focused light beams used for cutting, engraving, medical procedures, and experiments. Depending on the application, lasers can vary in power, wavelength, and design.

FAQ

What should I consider when buying a used laser or light source?

Check the device's power rating, wavelength, and overall condition. Ensure it meets the requirements for your specific application and verify any available maintenance records.

How do I ensure the laser or light source is shipped safely?

Use a transport service experienced in handling delicate equipment. Ensure the device is properly packaged, with adequate cushioning and protection against shocks.

What is the maintenance schedule for lasers and light sources?

Regular maintenance includes cleaning optical components, ensuring proper cooling, and checking electrical connections. Refer to the manufacturer’s manual for specific maintenance guidelines.