Used controllers

Casting ladle motorized 20t, IBW

• Manufacturer: IBW

With motorized tilting and remote control With intermittend gear (manual gearbox) frequency controlled With counterweight on the overside With mechanical switch to "tilting by hand" With useable lining and 2 pour...

2006 Motorized casting ladle, 14t, IBW

Vessel: depth: ø1750 mm, h. 1630 mm Height of the hook ±800 mm With motorized tilting and remote control With manual gearmotor, frequency controlled With counterweight on the overside With mechanical switch to "t...

Screw mixer GFA, ± 3 - 4 t/h

Motor mixer ATT; 7,5 kW, 220/380 V, 970 rpm With motor for pumps, with manual gear box With bunker, electrical control unit With brake for pneumatic cylinder on the rotation With sensor for door closer Control SI...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Sand conveyor GFA, 500 l

Year of construction: 1987, weight: 450 kg Ø entrance 150 mm, Ø exit 100 mm Entrance wiht butterfly valvefollowed by a cone valve With pneumatic control valves With high and low level probe Low level with pressur...

Hydraulic separating wedge DISA TK-3/300

• Manufacturer: DISA

With control panel With spring balancer Max working pressure: 300bar | Stroke of the wedge: 100mm | Jaws lenght: 265mm | Min wedge tip retracted: 26mm | Max wedge tip extended: 48mm | Cutting force: 20500daN | Hy...

Pneumatic Hammer HITACHI, HS5

• Manufacturer: Hitachi

With pneumatic 2 hand control Weight: 400 kg | Dimensions: length 1900mm, width 540mm, height 560mm | Shot axis: Ø 100mm | Air pression: 6 bar | Force of impact: 2805 Joule

Screw mixer AXMANN 5 t/h

• Manufacturer: Axmann

External dimensions: length 2570mm, width 1000mm, height 2150mm Maximum output 5 t/h With 2 gear pumps drived by direct current motors controlled by potentiometer With Relais control board in the machine base Wit...

Gasing unit LÜBER LW-FDA-425; 4kW

• Manufacturer: Lüber
• Model: LW-FDA 425

With 4 kW heating Max. core weight 15 kg (± 10 l) With contactor control and stainless steel storage tank 30 l Compressed air connection 1" Compressed air control via proportional valve With micro pump, gas dosin...

Water press pump for lining spayer

• Manufacturer: GRUNFOS

With surge tank 100 l and control box Weight: ± 200 kg | Motor: 1,5 kW, 2900 rpm, 240/415 V | Pressure: up to 15 bar, 4 m³/h

Combined Straight Line Wire Drawing Machine Steel Wire Drawing Equipment

• Manufacturer: Rainbow

Detailed Photos Product Parameters Diameter of capstan mm 560 400-360 Drawing dies time 9 9 Maximum diameter of inlet wire mm φ6.5 φ3.0-φ2.5 Minmum d...

Lance for temperature measurement SIDERMES

With charger and test equipment For control elements 400 mm

2006 Pneumatic sand feeder, 75 l

With sand pipe bend With control equipment, 24 V Weight: ± 80 kg | Dimensions: width 1000mm, depth 800mm, height 1000mm | Contenance: 75 l | Working pressure: 8 bar