Used machine tools

HYDAC Corporation SB330-32F1/112S-210E Bladder Accumulator 2054260

• used

• Manufacturer: Hydac

Johnson Gas Forge

• used

• Manufacturer: Johnson

Up for auction is a Johnson Gas Metal forge. The table has two small gas operated forges and a smelter. I do not know if this unit works as it hasn't been used in decades. **NOTE** Buyer is responsible for loadin...

Anvil by Trexton

• used

• Manufacturer: Trexton

31" long x 12.5" H, 12" horn, 1" square tool holder, Forged Steel, on home made stand

Ring Rolling Machine HBE

• new

• Manufacturer: HBE

Dia : 4000 mm, Height : 1000 mm, Radial : 250 tons, Axial : 200 tons, Min dia : 400 mm, Min ring height : 100 mm, Main roll dia : 820 mm, Main roll height : 1095 mm, Axial rolls angle of cone : 35º, Numb...

Ring Rolling Machine B-100H

• used

• Manufacturer: Ungerer/Schnutz/Irle

Minimum I.D. : 203.20 mm, O.D. Range : 431.80 mm, 660.40 mm & 1016 mm, Maximum O.D. with 3-Roller Bending : No Limit, Face Plate Rotations : 2/3/5 RPM, Capacities - : Flat on Flat : 44.45mm x 12.70mm to 203...

2,500 ton Voronezh KB8344 Heavy

• used

• Manufacturer: Voronezh

Available for immediate inspection Very Good Condition

National #2 Forge Reduceroll Re:24617

• used

• Manufacturer: National

This machine is available for viewing in Cleveland, Ohio.

1,000 ton Etchells model MF40/1000 S.P.H. Vertical

• used

• Manufacturer: Etchells

Additional info: • Four (4) Tie-Rod Construction • Horizontally opposed griping dies • Multi-Directional adjustment by wedges • Flat-Base Construction • Overload protection • Adjustable front stock gauging device...

3" National #6 Reducer Rolls (Forging Rolls) Re:25831

• used

Complete with: Flywheel safety guard Incorporated control panel Centralized grease lube system Air Clutch and Brake Herion pneumatic clutch & brake safe valve Available for immediate inspection and delivery Excep...

Asahi Okuma AT-635 2D/2B Cold Header

• used

• Manufacturer: Okuma

SPECIFICATIONS: FEATURES: * BUSHING CUT-OFF * OSG MONITOR * TIMED POSITIVE KNOCKOUT IN 1ST AND 2ND * WIRE STRAIGHTENER * SOUND ENCLOSURE * TONS of TOOLING!!

1980 1,200 ton National model 6-4 Heavy

• used

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

4" National High Duty Automatic Tong Feed Upsetter Re:24625

• used

• Manufacturer: National (ATF)

Built new in the 1970's. This machine is located in Europe and may be inspected there on request. It has an Auto Tong Feed System equipped with automatically operating mechanical tongs. An ATF machine will take t...

50kj Beche KGH 5.0B Short Stroke Hydraulic Die Forger

• used

• Manufacturer: Beche

Additional info: The line consists of: - 50KJ Beche hammer - 150 t trimming press - Induction heater Max blows with nominal blow effect - 99 bpm Useful blows with nominal blow effect - 45 bpm Slide stroke - min 5...

2-1/4" National #4 Reducer Roll (Forging Rolls) Re:25345

• used

Available for immediate inspection and delivery Dismantled and moved to storage

1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar

• used

• Manufacturer: Peddinghaus

Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...