Used Materials Testing in Taiwan

Hardness Specimen Cutting Device

• Manufacturer: cometech testing machines

QC-603I is suitable for hardness flat shape of polymer material, as a fixed sample or specimen trimming purposes. It needs to base on forming of appearance to make mold and take slightly larger than finished prod...

Drop Weight Impact Tester Confirm to BS EN 1621-1-2012、 BS EN 1621-2-2014 Standard

• Manufacturer: cometech testing machines

This tester is applied on buffer material test with a standard weight of 5kg hammer, drop height is usually 100cm, can produce about 50 joules to hit against test pieces vertically. This tester can read remaining...

Full-Auto Rockwell Hardness Tester Confirm to GB/T230.2, JJS Z2245, EN-ISO6508, ASTME-18 Standard

• Manufacturer: Wilson Rockwell

Applications: Hard alloy / Surface hardened steel / Copper alloy / Carburized steel / Hard cast steel / Malleable casting / Annealed steel / Hardened steel /Aluminum alloy / Soft steel / Bearing steel Features: ●...

Adhesion/Release Tester Confirm to FINAT 4 Standard

• Manufacturer: cometech testing machines

QC-527 test range can do low and high speed peel test and also for 90 ° 、180° multi-angle peel test. Low speed peeling force generally uses 300mm/min to proceed with test, testlow-stick adhesive label tear force....

LCD Monitor Carton Packaging Compression Tester Confirm to ISO 12048 ISO 2872 ASTM D4169 TAPPI T804 GB T4857-4 JIS Z212 Standard

• Manufacturer: cometech testing machines

This model is designed for test large LCD screen packaging materials such as Styrofoam or other materials package container to proceed with whole carton compression strength test.Load measuring adopt three point ...

Electronic Drop Dart Impact Tester Confirm to ASTM D1709 GB-9639 Standard

• Manufacturer: cometech testing machines

This tester is according to test standard of method A and method B. The test plastic film is clipped on dia. 127mm of round clamp by very quick pneumatic way. The impact head method A is dia. 38.1mm and method B ...

Compression & Deformation Tester Confirm to ASTM-D395, JIS K6262, GB/T 7759, ISO 815 Standard

• Manufacturer: cometech testing machines

It is use static state way to testing rubber under constant compression and exerting heat condition to check the permanently deformation rate of the material. This test needs to collocate with oven and Thickness ...

A-type Hardness Tester Confirm to JIS K7215-1992 ASTM D2240 ISO 868 DIN 53505 Standard

Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

C-type Hardness Tester Confirm to JIS S6050 Standard

Hardness tester is suitable for soft material such as nonmetal. Applying the specified force on the standard material plate, and the hardness of the material can be obtained by reading the values on the pointer. ...

Vicat Heat Deflection Tester Confirm to ASTM D648 ISO 75-1 Standard

• Manufacturer: cometech testing machines

The specimen is given a fixed 10N force (or 50N) at the center with a standard Ø1 mm pin, and the temperature should increase by 50 (or 120) degrees Celsius per hour. When the penetration depth of specimen reache...

Manual Molding Machine

• Manufacturer: cometech testing machines

QC-601B has parallel pressure plates and according to area of the material and force demand to choose machine type. Commonly used in powder compact, parts assembly, lamination work. Put the ingredients in the mid...

Water Absorption Tester Confirm to TAPPI T441, JIS-P8140 Standard

• Manufacturer: cometech testing machines

Moisture absorbency is the important characteristic of paper and it tests on various (treated or untreated) of paper and cardboard material which absorption of water, oil …of liquid. The specimen is fixed on QC-1...

121M1F-Box Compression tester Confirm to ISO 12048、ISO 2872、ASTM D4169、TAPPI T804、GB T4857-4、JIS-Z-0403-2、ASTM D642、GBIT 16491、DIN 55440-1 Standard

• Manufacturer: cometech testing machines

QC-121M1F tests the compression capacity of large packaging material such as cartons, foams or styrofoam, etc. The tester simulates a testing condition similar to logistics and storaging industry in which cartons...

Circular Sample Cutter Confirm to ISO3801, ASTM D3776, GB/T4669, BS2471 Standard

• Manufacturer: cometech testing machines

QC-PS can cut specimens of area 100cm², weighing specimen unit weight, the balance of the required minimum reading value should reach 0.01 g. The cutter can cut specimens that thickness are 5 mm. Cutting material...

Elmendorf Tearing Strength Tester Confirm to TAPPI-T414, JIS P-8116 Standard

QC-337 can be classified by different test strength; it can test the tear strength of paper, fiber and PVC material. Grip the specimen and use cutter to make a notch. Falling pendulum will use its swing force to ...