Used Materials Testing in Flanders, Belgium

Calibration Cover Meter rebar

Calibration Rebound Hammer

Calibration Autom Vicat Apparatus: weight and dimensions

Calibration Vicat Apparatus

Calibration Autom Penetrometer on Bitumen

Calibration Automatic Penetrometer on Bitumen

Lightweight penetrometer ZLR-10

Lightweight penetrometer ZLR-10 according to DIN EN ISO 22476-2:2005 (DPL) (before DIN 4094) and TP BF-StB Teil B 15.1(DPL-5) > includes: 1 x Pile driver (10 kg) 1 x Anvil 1 x Guide bar with handle 6 x Plumb with...

Digital Crack width gauge with data connection

digital gap meter with wireless data connection sensor range +/- 80 mm d = 0,003mm incl.met air temperature data logger wireless data connection or USB connection The Wireless Crack Movement Recorder provides con...

A083: Aggregate crushing value apparatus dia.75mm

Aggregate crushing value apparatus dia.75mm Standard: comparable to BS 812:110 Comprising 75 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 57 mm diameter x 90 mm deep. Used for ...

S165-01 KIT Cone digital penetrometer, complete

Cone digital penetrometer, digital, complete Penetrometer standaard digitaal bestaat uit: - Aluminium base with leveling screws and spirit level. - Chromed vertical rod with "micrometric vertical displacement dev...

Installation and training on site by producer

Installation and training on site for èe Four Point Bending Beam Testing System

Calibration Load Measuring up to 3000kN

Calibration Load Indicating Device up to 3000 kN The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited according ...

Calibration ISO 17025 Load Measuring up to 200 kN

Calibration under ISO17025 accreditation of a Load Ring up to 200kN. Certificat by a accredited laboratory after payment. The calibration/testing services offered in this quotation are performed by European Lab S...

Calibration Rebound Hammer

Inspection with calibration of a Rebound Hammer Certificate is available after paiment of invoice The device must reach your Sint-Niklaas offices through your services. We can arrange for transport after calibrat...

S234-KIT Sand density cone apparatus 6,5"

Sand density cone apparatus 6,5" Used to determine the in-situ density of fine graned compacted soil. The test consists in digging a hole into the ground and then collect, dry and weight the sampled soil. The hol...

A081-01 : Lightweight aggregates crushing resistance

Lightweight aggregates crushing resistance Standard : EN 13055-1 METHOD 1 Apparatus for the determination of the crushing resistance of lightweight aggregates having diameter from 4 to 22 mm, and a volumic mass o...

B024 : Permeameter

Permeameter Mainly used in situ to perform and to check the permeability and drainage on road carpets, concrete pavements, tamped earth etc. The test consists in filling the cylinder with water, after ermetically...

Calibration Proctor Mould Small diam 100

• Manufacturer: Proctor

Calibration of a Proctor Mould: diameter and height The calibration/testing services offered in this quotation are performed by European Lab Services site Sint-Niklaas. European Lab Services is accredited accordi...