Test, Lab, Medical equipment » Materials Testing » Bend Testing Equipment » Gauteng

Building Filters

42

Used Bend Testing Equipment in Gauteng, South Africa

  • Compression and Flexural Frames (UTCM-3722)

    Compression and Flexural Frames (UTCM-3722)

    • Manufacturer: Labequip

    Compression and Flexural Machines Product Code: Description: The UTCM-3722 and UTCM-3742, very rigid two column frames have been designed for compression and/or flexure testing of mortar prisms and cubes specimen...

    Alberton, South Africa
  • Flexural Frame U/C Type (UTC-5600)

    Flexural Frame U/C Type (UTC-5600)

    • Manufacturer: UTEST

    Compression and Flexural Testing Machines Product Codes: UTC-5600 200 kN Capacity Flexural Testing Frame U Type UTC-5700 300 kN Capacity Flexural Testing Frame C Type Description: The vers...

    Alberton, South Africa
  • 600 kN Capacity Flexural Frame

    600 kN Capacity Flexural Frame Four Column Type (UTC-5660)

    • Manufacturer: UTEST

    Compression and Flexural Testing Machines Description: UTEST 600 kN capacity Flexural Frame is designed for minimum deflection at maximum load resulting in very high accuracy. The load frame is a four-column desi...

    Alberton, South Africa
  • Distance Pieces and Platens for

    Distance Pieces and Platens for Frames (UTCM-4630)

    • Manufacturer: Labequip

    Compression and Flexural Machines Product Code: Distance Pieces for Frame: Due to the modular design of the frames any sample with suitable size, load and pace rate can be test on both chambers by decreasing the ...

    Alberton, South Africa
  • Poker Vibrator (UTC-0928)

    Poker Vibrator (UTC-0928)

    • Manufacturer: Labequip

    Hardened Concrete Testing Product Codes: Description: The Poker Vibrator is ideal for the internal compaction of concrete specimens and a good alternative to traditional tamping bar, especially when there are lar...

    Alberton, South Africa
  • FULLY-AUTOMATED PERMEABILITY SYSTEM (LoadTrac II,

    FULLY-AUTOMATED PERMEABILITY SYSTEM (LoadTrac II, FlowTrac II)

    • Manufacturer: Labequip

    Advanced Soil Systems ASTM D-5084 – Flexible wall permeability ASTM D-2434 – Rigid wall permeability The LoadTrac II/FlowTrac II flow pump provides a unique and versatile way to run flexible wall permeability tes...

    Alberton, South Africa
  • Capping Retainers (UTC-0372A)

    Capping Retainers (UTC-0372A)

    • Manufacturer: Labequip

    Compression and Flexural Testing Machines Product Code: Description: Unbounded Cap is used for determining of compressive strength of hardened concrete cylinders as alternative method to the sulphur hot capping o...

    Alberton, South Africa
  • Compressometer-Extensometer (UTC-0303)

    Compressometer-Extensometer (UTC-0303)

    • Manufacturer: Labequip

    Compression and Flexural Testing Machines Product Codes: Description: Concrete Compressometers are used to determine the deformation (both axial and diametrical) of concrete cylinder or cube specimens during the ...

    Alberton, South Africa
  • UTEST Software (USOFT-4830.FPR)

    UTEST Software (USOFT-4830.FPR)

    • Manufacturer: UTEST

    Compression Testing Frames Product Code: Description: The Automatic Compression/ Flexure Testing Machine can be controlled (Start, stop commands) by a computer with the software USOFT-4930.FPR (given free of char...

    Alberton, South Africa
  • Special Flexural Frames (UTC-4830)

    Special Flexural Frames (UTC-4830)

    • Manufacturer: Utest

    Compression and Flexural Testing Machines Description: A wide range of flexural testing machines to support specific requirements of clients can be custom produced. Some examples of special flexural machines and ...

    Alberton, South Africa
  • Plunger Penetration Apparatus (UTCM-0665)

    Plunger Penetration Apparatus (UTCM-0665)

    • Manufacturer: Labequip

    Compression and Flexural Machines Product Code: Description: The UTEST Plunger Penetration Apparatus is used to determine the consistency of fresh mortar, building lime and masonry cement. The test apparatus cons...

    Alberton, South Africa
  • Air Entrainment Meter for Mortar

    Air Entrainment Meter for Mortar (UTCM-0666)

    • Manufacturer: Labequip

    Compression and Flexural Machines Product Code: Description: The UTCM-0666 Air Entrainment Meter for Mortar is used for determining the air content of cement paste, cement mortar and lime mortar. The air entrainm...

    Alberton, South Africa
123

Overview

Bend testing equipment is designed to evaluate the ductility, strength, and performance of materials by subjecting them to bending forces. This equipment is essential in industries such as construction, manufacturing, and material science for quality control and research purposes. It helps determine the flexibility and structural integrity of various materials, including metals, plastics, and composites.

FAQ

What factors should I consider when purchasing bend testing equipment?

Consider the material types you will be testing, the force range of the equipment, its precision and accuracy, and whether it meets industry standards. Also, check for any additional features like digital readouts or data recording capabilities.

How is bend testing equipment typically shipped?

Bend testing equipment is usually shipped via freight due to its size and weight. Ensure the equipment is securely packed to prevent damage during transit and use a reliable shipping company experienced in handling delicate machinery.

What is the maintenance schedule for bend testing equipment?

Regular maintenance includes calibrating the equipment, inspecting and cleaning moving parts, and checking for wear and tear. It's also important to follow the manufacturer's guidelines for any specific maintenance requirements.