2008 MULTICAM 3000
used
- Manufacturer: MultiCam
- Model: 3000
(8) Automatic Tool Changer Z-Axis Clearance 6” Cut Speed 1400 IPM 35.5 MPM Rapid Traverse 2500 IPM 63.5 MPM Drive System (X,Y) Rack & Pinion Rack & Pinion Drive System (Z) Ball Screw Vacuum System 10HP Vacuum Pump
2014 MULTICAM 7000
used
- Manufacturer: MultiCam
X axis travel: 120" | Y axis travel: 80" | Z axis travel: 17" | Spindle speed: 24 - 24,000 RPM | Spindle motor: 7 H.P. | Spindle brand: PENSKE | Number of spindles: 8
- Trusted Seller
Southwestern Industries TRM 1840
used
- Manufacturer: Southwestern Industries
Swing over bed: 18" | Spindle bore: 2" | Between centers: 40" | Tailstock spindle taper: 1-1/2" | Dimensions: 108" x 54" x 72"
- Trusted Seller
$3,700 USDVinton, TX - Trusted Seller
2000 Haas BAR 300
used
- Manufacturer: Haas
- Model: BAR 300
Diameter: 0.25" - 3.125" | Weight: 1,500.00 | Dimensions: 64" x 96" x 55"
$1,950 USDVinton, TX - Trusted Seller
Standard-Modern S/M
used
- Manufacturer: Standard-Modern
Swing over bed: 18" | Between centers: 100" | Spindle bore: 2" | Tailstock spindle taper: MT3 | Dimensions: 54" x 149" x 69" | Controller: Fagor | Hp: 10 | Voltage / phase: 380 / 3
Vinton, TX - Trusted Seller
Southwestern Industries TRM 1840
used
- Manufacturer: Southwestern Industries
Swing over bed: 18" | Between centers: 40" | Spindle bore: 2" | Tailstock spindle taper: 1-1/2" | Dimensions: 108" x 54" x 72" | Voltage / phase: 220 / 3
Vinton, TX - Trusted Seller
2000 Haas BAR 300
used
- Manufacturer: Haas
- Model: BAR 300
Diameter: 0.25" - 3.125" | Weight: 1500 lbs | Dimensions: 64" x 96" x 55"
Vinton, TX - Trusted Seller
2006 Haas SL40TB
used
- Manufacturer: Haas
- Model: SL-40TB
Tailstock Swing over bed: 40" | Between centers: 50" | Spindle bore: 6" | Tool turret: 12 | Controller: Haas | Rpm: 2,400 | Weight: 29,900 lb | Dimensions: 92" x 152" x 90"
Vinton, TX - Trusted Seller
Haas BAR 300
used
- Manufacturer: Haas
- Model: BAR 300
Diameter: 0.25" - 3.125" | Weight: 1500 lbs | Dimensions: 64" x 96" x 55"
Vinton, TX 
2015 Mazak Quick Turn Universal 250-II
used
- Manufacturer: Mazak
- Model: QUICK TURN 250
SPECS: - Bar Capacity: 2" - Chuck Size: 8" - Spindle Speed: 4,500 RPM - Spindle Motor: 20 HP - X Axis Travel: 8.25" - Z Axis Travel: 23.75" - Rapid Rate Z Axis: 1,181 IPM - Turret Tools: 12 Station - Rapid Rate ...
- Trusted Seller
LOT OF 3000 CITIZEN CM200C32768AZFT CRYSTAL 32.7680KHZ 12.5PF SMD T119974
new
- Manufacturer: Citizen
- Model: C32
Warranty Information This is a new item, with original packaging and includes a 30 day warranty. New roll
$845 USDEl Paso, TX 
2006 Hankook Protec 9NC/4000 *** ONLY 6,069 Run Time Hours***
used
- Manufacturer: Hankook
- Model: 9NC
EQUIPPED WITH: - Fanuc 21i-TB Control - 10" Spindle Bore/Bar Capacity - Chip Conveyor - 25" 4 Jaw Manual Chuck on Front - 25" 3 Jaw Manual Chuck on Rear - 8 Station Turret that Mounts on Cross Slide - Dorian Too...
- Trusted Seller
2013 Hurco Model TM-18Li CNC Turning Center #0810553
used
- Manufacturer: Hurco
- Model: TM18Li
Specifications Equipped With Hurco Model TM-18Li CNC Turning Center Specifications:
Houston, TX 
1994 WEILER E-50 TEACH AND LEARN FLAT BED ENGINE LATHE
used
- Manufacturer: Weiler
- Model: E50
Specifications subject to confirmation upon inspection. Lathe isfully functional and in good condition.
Samsung SL40/1500 CNC Lathe
used
- Manufacturer: Samsung
- Model: SL40/1500
Good condition Samsung SL40/1500 CNC Lathes manufactured in 2014. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword