- Trusted Seller
PCI 78FB
- Manufacturer: PCI
Two (2) Rotating Blades One (1) Stationary Blade Directly Driven by a 2 HP 208-230/460 Volt 1725 RPM A/C Motor, Mounted on Frame Two Trim Inlets. S/N 71992 Trim Cutter on Unitized Frame with Sterling Model 6UHE B...
$6,500 USDChicago, IL - Trusted Seller
1999 Moretto DYT204 MT Hopper Dryer
- Manufacturer: Moretto
Model DT 204 MT dehumidifying hopper dryer rated 150c/m an hour. With model DH 300T hopper having a 350 lt capacity. Mfd 1999. Serial number 991136. weight 235 kg. 400/3/50
$3,500 USDChicago, IL - Trusted Seller
1999 Gloucester 3-Roll Cooling Stack – 60″ x 24″ – 1999 – For Sheet Extrusion
- Manufacturer: Gloucester
60″ Gloucester Cooling and Polishing Stand (3) Nominal 24″ Diameter Chrome Plated Rolls -Mounted in a 45 degree arrangement for down stack operation. Rolls are Pneumatically Actuated. Chrome rolls are via approxi...
$175,000 USDChicago, IL - Trusted Seller
Corona CR104-PE Treater
- Manufacturer: Corona
Unit Has Individual Sliding Fingers that Adjust up To a 50” Wide Treater Width. with 2 Kw High Voltage Transformer and Controls. Model CR104-PE Serial Number T-15974-04-10 Job number T-15974. Model CPT-20 control...
$7,500 USDChicago, IL 
PURITAN VERTICAL SPOUT MAGNET 17423
- Manufacturer: Puritan
Puritan model VS288EZ vertical spout magnet having a 3.5″ inlet and outlet. Stainless steel construction. Engineered to remove fine to large ferrous contaminants from high volume, gravity fed product streams. Pur...
Elk Grove Village, IL
SPROUT WALDRON 1410MSR 10″ AIRLOCK 12045
- Manufacturer: Sprout Waldron
Sprout Waldren model 1410MSR, 14″ diameter x 10″ airlock opening, S/N 82-1467, chain and sprocket driven by a 2 HP DC 1750 RPM motor through a 60:1 gearbox, no controls.
Elk Grove Village, IL
Szegvari Lab Attritor - 8” Dia x 8.25” Deep Jacketed Bowl
- Manufacturer: Union Process
52038009 Used Union Process 1-S Series Laboratory Attritor. Tank capacity 1.5 gallon, working capacity 0.8 gallons. Media volume 1.0 gallons. Jacket tank approximate 8" diameter x 8-1/4" deep. Missing agitation s...
$6,500 USDBelvidere, IL
Industrial Bare Middle Cooling Roll – 36" O.D. x 92" Face for PV Film Processing
- Manufacturer: UnknownUnknown
49296010 Used Bare Middle Cooling Roll. 36" O.D. x 92" face. For Schkopau PV film line.
Belvidere, IL- Trusted Seller
Norden Tube Plastic 602
- Manufacturer: Norden
Norden Model 602, automatic, hot air, plastic or laminate tube filler and sealer rated from 10 to 40 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50mm to 2...
Carol Stream, IL - Trusted Seller
Cotuplas Tube Plastic RS58-D
- Manufacturer: Cotuplas
Cotupas, Model RS58-D, Semi automatic, rotary tube filler and sealer with number of tubes per minute – depending on materials, application and operator dexteriy. Equipped with 21" ID x 16" deep dual stacked stain...
Carol Stream, IL - Trusted Seller
Norden Tube Plastic 400
- Manufacturer: Norden
Norden Model NM400HA, Automatic, hot air, plastic or laminate tube filler and sealer rated from 10 to 40 tubes per minute – depending on materials and application. Tube size range: 3/8" to 2" OD x 2" to 10" in He...
Carol Stream, IL - Trusted Seller
Norden Tube Plastic 602
- Manufacturer: Norden
Norden, Model 602, automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 60 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50mm to...
Carol Stream, IL 
Paint Media Mill, 8" x 30" Milling Chamber, 6 Gallon, 10 HP Motor
- Manufacturer: UnknownUnknown
50556009 Used Paint Media Mill. includes 8" diameter X 30" high milling chamber, approximate 6 gallon. Stainless Steel screening section, jacketed chamber. Driven by 10 HP, 220/440 V, 1740 RPM, 3-phase, 60 cycle ...
$3,500 USDBelvidere, IL
WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT
53894001 Used WSI 2.2 Meter Extended Gravity Twin Wire Mud Press, Model MM-2200-EXT Gravity. Designed and built to receive pre-processed conditioned" mud sludge flow and remove a major portion of the water (Filtr...
Belvidere, IL- Trusted Seller
Norden Tube Plastic 602
- Manufacturer: Norden
Norden, Model 602, Automatic, hot air, plastic or laminate tube filler and sealer. Rated from 10 to 60 tubes per minute – depending on materials and application. Tube size range: 10mm to 50mm in Diameter; 50 mm t...
Carol Stream, IL 
APM DS-SS-IMP-5/16-16 Packaging Machinery
- Manufacturer: APM
- Model: DS-SS-IMP-5/16-16
Good condition APM DS-SS-IMP-5/16-16 Packaging Machinery. Located in USA and other countries. Click request price for more information.
USA
Tip: Enter manufacturer, model or keyword