Used Processing in Illinois, USA

CONAIR/GATTO HS-2-4 PROFILE SAW 4715

• Manufacturer: Conair

CONAIR/GATTO MODEL HS-2-4 PROFILE SAW, 2 HP 480 VOLTS 3 PHASE, 10″ HIGH SPEED STEEL BLADE, PNEUMATIC HOLD-DOWNS, TUBING CAPACITY 0 – 2 3/8″ OR UP TO PROFILES 2″ X 4″ WIDE, 10″ TABLE TRAVEL, DIMENSIONS ARE 43 3/4″...

YOUNG INDUSTRIES 6-IN 6″ AIRLOCK 14295

• Manufacturer: Young Industries

Young Industries model 6-IN airlock, S/N HG-8687, powered by a 1/2 HP 1780 RPM motor directly driving the gearbox chain sprocket steel vanes, square bolt on flange mount

TRIA TRAINO D210 FEED ROLLS 14597

• Manufacturer: Tria

Tria model Traino D210 feed rolls. S/N 33202959. Code 886.000.161, 2003 model year. 8.25″ diameter x 56″ wide knurled steel rolls powered by a 3.7 kW (5HP) 208-230V/460V 1,725 RPM motor through a gearbox. Pneumat...

PADDLE FEED ROLL 10249

Used paddle feed roll. 5″ diameter x 24″ wide 110V/1ph/60Hz 1/4HP motor air clutch chain and sprocket drive no controller.

VORTEX SA06-RS.0007 PNEUMATIC SLIDE GATE 12497

• Manufacturer: Vortex

Vortex model SA06-RS.0007, pneumatic slide gate, S/N 38478-004. 6″ square gate.

CONAIR EXF-450 3 AXIS PICKER 12243

• Manufacturer: Conair

Conair model EXF-450, 3 axis picker. S/N 011761. Job no. 101340, manufactured in April 1995. Pneumatic operation controller is not included.

CONAIR POWER FILL PUMP STATION 15005

• Manufacturer: Conair

Conair power fill pump station model B779901W, S/N B41865, 3 HP (1.75 kW) 480V/3ph/60Hz operation. The pump station receivers in the photo are not included.

DAVIS STANDARD DSC-U2 LAB ROTARY 15075

• Manufacturer: Davis-Standard

Davis Standard model DSC-U2 rotary knife cutter, S/N 17368BB. Laboratory sized unit.

SMOOT 9″ ROTARY AIRLOCK 19010

Smoot 9″ rotary airlock. S/N 10292. 9″ x 9″ throat opening with 11″ x 11″ bolt flange. Powered by a 3/4 HP 208-230/460-volt motor thru a gearbox. Has 5″ OD blow-thru mounted on under-side discharge.2 Available

PRODUCT DESIGN & DEVELOPMENT 2 18703

One (1) used Product Design and Development two lane profile notcher. Air actuated. 5″ x 2 ¼” cylinder. Two post design. Stand mounted.

TECHNO-PLAST PULLER / TRAVELING SAW 18683

• Manufacturer: Techno-Plast

Used Techno-Plast model TRZ-240SA/300 Puller/Traveling Saw Combination. S/N 7010750. 9 1/4″ wide cleats with 96″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling with nominal 14...

GREINER 80/9 PULLER / SAW 18515

• Manufacturer: Greiner

Used Greiner model 80/9 Puller / Traveling Saw Combination. S/N R9804350. Utilizes nominal 9 1/4″ wide cleats with 108″ belt contact length. Chain driven with dual pneumatic gap adjustment. Air traveling saw with...

GOODMAN CUTTER / PULLER 18397

One (1) used Goodman puller / cutter combination. S/N 6498. Nip roll puller has 3.5″ wide x 4″ diameter rolls. Puller driven by approximately a 3 HP A/C motor. On demand cutter can handle up to a 3″ OD bushing. C...

PAIR MEYER 5.5″ ID AIRLOCKS 18432

• Manufacturer: Meyer

Pair of incomplete William J. Meyer HDX series 5.5″ airlocks. S/N 291105-010B and 292545-010A. Both have 11″ OD bolt flange mount with 5.5″ OD airlock inlet and outlet. Cast iron airlock housing with replaceable ...

CDS CBH36-6 6″ X 36″ 18259

• Manufacturer: CDS

CDS model CBH 36-6 belt puller. S/N 230202. Has nominal 6″ wide belts with 36″ of belt contact length. Set up for right to left operation. Top and bottom belt manually height adjustable via hand wheel. Belts are ...

APM VCBS Vertical Form Fill Sealing Machines (VFFS)

• Manufacturer: APM
• Model: VCBS

Good condition APM VCBS Vertical Form Fill Sealing Machines (VFFS)s. Located in USA and other countries. Click request price for more information.