- Auction
1999 OMS Die Casting Cell
consisting of melting furnace Striko West furnace W 65 SL, built in 1997, serial no.: 55288, die casting machine OMS, spraying robot Fanuc, incl. robot control, parts removal robot Kuka KR 15-2 built in 1999 incl...
Schwäbisch Gmünd, GermanyVisit Auction Website - Auction
2007 Frech DAK 580/62 Die Casting Cell
- Manufacturer: Frech
consisting of dosing furnace Westomat 65 S, 540 dm3, . 4568, Die casting machine Frech DAK 580-62, Spraying robot Fanuc m710ic, incl. robot control and touch panel, Parts removal robot Fanuc R2000ic, incl. robot ...
Schwäbisch Gmünd, GermanyVisit Auction Website 1994 FRECH MOS 5/20 U
- Manufacturer: Frech
Used furnace for use on DAW5 or DAW20 die casting machines without furnace cabinet
Schorndorf, Germany2004 Robamat 5201
- Manufacturer: Robamat
Used heater from Robamat for use on die casting machines. This single-circuit unit is designed for controlling the temperature of a die casting tool with oil. Dismantled from ongoing production. The unit was test...
Schorndorf, Germany1998 FRECH Weightcontrol 2000
- Manufacturer: Frech
Used scale for use on die casting machines with a piece weight of up to 2000g. The device was inspected and repaired by the manufacturer. Load cell and control board replaced.
Schorndorf, Germany2017 ROBAMAT 2212
- Manufacturer: ROBAMAT
Used heating and cooling unit from Robamat for use on die casting machines. This dual-circuit unit is designed for controlling the temperature of a die casting tool with water. The unit has been tested, serviced,...
Schorndorf, Germany2001 FRECH M200/120
- Manufacturer: Frech
Used machine furnace, Meltec type M 200/120, for use on Oskar Frech hot-chamber die-casting machines with a 200-ton capacity for processing magnesium alloys. Melting capacity per hour: 120 kg/h, 54 kW power ratin...
Schorndorf, Germany2014 FRECH ZC200/250
- Manufacturer: Frech
Used machine furnace, Meltec type ZC 200/250, for use on Oskar Frech DAW 200 hot-chamber die-casting machines for processing zinc alloys. Melting capacity per hour: 250 kg/h, 36 kW power rating. Control cabinet w...
Schorndorf, Germany2003 Frech Espana DAW 125 PD SBC3
- Manufacturer: Frech
Used DAW 125 die-casting machine with SBC3 control for zinc alloys. Available as a base for a general overhaul at the manufacturer's factory.
Schorndorf, Germany1995 FRECH DAW 200S
- Manufacturer: Frech
Used DAW 200 S die-casting machine with Datavario control for zinc alloys. Available upon request. The manufacturer recommends a general overhaul at the overhaul facility. This can be carried out to the extent re...
Schorndorf, Germany2000 FRECH DAW 80S
- Manufacturer: Frech
Refurbished DAW 80 GO die-casting machine with DataLogic control for zinc alloys. Available upon request.
Schorndorf, Germany1999 FRECH DAM 315 S
- Manufacturer: Frech
Used DAM 315 S die-casting machine with Datacontrol control for magnesium alloys. Available from our used machine warehouse. The machine is equipped with a Rauch MMO 315E electric furnace. No spraying device. The...
Schorndorf, Germany2024 FRECH W200Zn-ST
- Manufacturer: Frech
Machine Equipment 1.1.1 Motorized safety door, right in the pouring direction 1.4.0 Machine bearings 1.5.4 Machine interior lighting 1.11.0 Equipment package - Energy efficiency 2.0.1 Ejector assistance packages ...
Schorndorf, Germany2000 FRECH ZC80/180
- Manufacturer: Frech
Used furnace cabinet for a Frech type DAW 80 die casting machine – suitable for a MELTEC type 80/180 multi-chamber furnace with individual controllers. Has been tested for functionality by the manufacturer.
Schorndorf, Germany2007 FRECH Spraymotion 411 E
- Manufacturer: Frech
Used Spraymotion 411 E electric sprayer for use on die casting machines. The device is tested for functionality by the manufacturer. Includes spray and blow bar (SR system with control nozzles) and stand. Connect...
Schorndorf, Germany